Добрый день.

Скачал Линукс мастер 5.0

Пробовал ставить на 2-е машины разных конфигураций. Оба раза установка завершилась с критическими ошибками. Выдал длиннющий список ошибок. Проанализировать не удалось. После перезагрузки доходит до формы ввода имени-пароля. После ввода пароля пказывает окно в заголовке которого написано что не смог запустить bash интерпретатор.

Система получалась не рабочая. Причем ставил один раз с дополнительным пакетом по для образования. Второй раз без. Результат одинаковый.

Из положения вышел загрузившись в режим LiveCD и щелкнув по значку "установить систему на жесткий диск". В этом случане установка проходит корректно. Но как я понял не хватает программ для учителей.

Опытная зона установилась без проблем.

Вот собственно первые впечатления.

> Выдал длиннющий список ошибок. Проанализировать не удалось. 

Список ошибок покажите. Скорее всего, проблема с СD/приводом. Контрольные суммы .iso тоже желательно проверить.

Здравствуйте! Тоже имеется проблема при установке альтлинукс 5.0.2. Он попросту не устанавливается. Во время установки пакетов экран становится чёрным, дисковод выплёвывает диск и мигают лампочки caps lock и scroll lock. В чём может быть проблема? Техподдержка не смогла ответить на этот вопрос.

Иван писал(а):

5.0.1 Мастер устанавливается нормально, а вот 5.0.2 Мастер, похоже битый ISO. У меня тоже установка 5.0.2 Мастер срывалась в итоге ставлю 5.0.1 Мастер. В 5.0.2 Юниор и Лёгкий проблем не замечено.

Ради спортивного интереса скачал вчера 5.0.2-Мастер и поставил под VirtualBox-4.0.12r72916. Нормально стала конфигурация для учителя. Выделял 500 Миб оперативки и 16 Гиб диска. Всё работает без проблем. Иван, проблему нужно искать на вашем диске или в аппаратной части ПК.

Здраствуйте. У меня проблема в следующем. После установки Мастер 5,0,2, которая тоже закончилась критическими ошибками, но тем не менее все запускается и работает. Но менеджер пакетов Synaptic обнаружил четыре пакета с ошибками. Чтобы их исправить или удалить менеджер требует: Вставьте, пожалуйста, диск с меткой: ALT Linux 5.0.2 School Master (p5) main build 2011-01-14 в дисковод /media/cdrom/. Что делать? Нельзя ли через интернет это сделать?

Кайрат Жумансаринов писал(а):

Julia Dronova (administrator) писал(а):

Устанавливаем Мастер 5.0.1 на нетбук ASUS (его особенность - новый процессор Intel Atom с новым графическим ядром HD 3600 - из-за него весь "сыр-бор"). Live CD грузится нормально, за исключением того, что устанавливатся разрешение 800Х600, вместо 1024Х600. Установка в обычном и безопасном режиме заканчивается крахом (экран покрывается полосами артефактов) на этапе выбора монитора-графической подсистемы, т.е. когда система практически установлена. Попробывал загрузиться с Live CD и установить систему из под него - о чудо! - она установилась, но не полностью, а только то, что и было в режиме Live CD. Вопросы: 1)можно ли доустановить всё остальное и как? 2) Возможно ли изменить разрешение 800Х600 на максимальное и как? 3) Звук есть, но нет значка управления на панели задач, Как исправить? Нужен именно Мастер 5.0.1 (рабочий). Другие варианты не рассматриваются.

Первые итоги беглого осмотра. Со звуком разобрался - значек микшера нашел, звук есть. Wi-Fi, как ни странно, работает. Однако обнаружились другие неприятности - не установлен Synaptic, а в alteratore нет пункта Обновление ПО. На установочном DVD нашёл пакеты synaptica, однако ручками через терминал он не устанавливается. Возможно, что-то не так делаю? Пичалька (((

P.S. При попытке настройки экрана через alterator - "артефактный полосатый экран смерти". В нете пишут, что драйверов на Intel HD Gr 3600 нет и не предвидится ((

"С горя" продолжаю мучить своего малыша - попробывал поставить Adobe Reader через терминал ручками, всё нормально поставилось. Почему с диска установочного не ставится, пока не могу понять?

Владимир Анненков писал(а):

>на Intel HD Gr 3600 нет и не предвидится

[user@localhost ~]$ su -
Password:
[root@localhost ~]# apt-get dist-upgrade
Reading Package Lists... Done
Building Dependency Tree... Done
Calculating Upgrade... Done
0 upgraded, 0 newly installed, 0 removed and 0 not upgraded.
[root@localhost ~]# apt-get update
Reading Package Lists... Done
Building Dependency Tree... Done
[root@localhost ~]# apt-get install synaptic
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package synaptic
[root@localhost ~]#

[user@localhost ~]$ su -
Password:              
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation Device 0bf1 (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Device 0be1 (rev 09)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)                                                         
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)                                                                         
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)                                                                         
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
[root@localhost ~]#

[user@localhost ~]$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu  
[    0.000000] Linux version 2.6.30-std-def-alt15 (builder@apiary.orion.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt13) (GCC) ) #1 SMP Mon Dec 14 08:45:48 UTC 2009                                                          
[    0.000000] KERNEL supported cpus:                                          
[    0.000000]   Intel GenuineIntel                                            
[    0.000000]   AMD AuthenticAMD                                              
[    0.000000]   NSC Geode by NSC                                              
[    0.000000]   Cyrix CyrixInstead                                            
[    0.000000]   Centaur CentaurHauls                                          
[    0.000000]   Transmeta GenuineTMx86                                        
[    0.000000]   Transmeta TransmetaCPU                                        
[    0.000000]   UMC UMC UMC UMC                                               
[    0.000000] BIOS-provided physical RAM map:                                 
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)        
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)      
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)      
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f36f000 (usable)        
[    0.000000]  BIOS-e820: 000000003f36f000 - 000000003f3b6000 (ACPI NVS)      
[    0.000000]  BIOS-e820: 000000003f3b6000 - 000000003f3cb000 (reserved)      
[    0.000000]  BIOS-e820: 000000003f3cb000 - 000000003f3cc000 (usable)        
[    0.000000]  BIOS-e820: 000000003f3cc000 - 000000003f3e5000 (reserved)      
[    0.000000]  BIOS-e820: 000000003f3e5000 - 000000003f3f6000 (ACPI NVS)      
[    0.000000]  BIOS-e820: 000000003f3f6000 - 000000003f414000 (reserved)      
[    0.000000]  BIOS-e820: 000000003f414000 - 000000003f417000 (ACPI NVS)      
[    0.000000]  BIOS-e820: 000000003f417000 - 000000003f421000 (ACPI data)     
[    0.000000]  BIOS-e820: 000000003f421000 - 000000003f429000 (ACPI NVS)      
[    0.000000]  BIOS-e820: 000000003f429000 - 000000003f60b000 (reserved)      
[    0.000000]  BIOS-e820: 000000003f60b000 - 000000003f6f0000 (usable)        
[    0.000000]  BIOS-e820: 000000003f6f0000 - 0000000040000000 (reserved)      
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)      
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)      
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)      
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)      
[    0.000000] DMI 2.7 present.                                                
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. 
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)                                                                  
[    0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x100000                      
[    0.000000] MTRR default type: uncachable                                   
[    0.000000] MTRR fixed ranges enabled:                                      
[    0.000000]   00000-9FFFF write-back                                        
[    0.000000]   A0000-BFFFF uncachable                                        
[    0.000000]   C0000-CFFFF write-protect                                     
[    0.000000]   D0000-E7FFF uncachable                                        
[    0.000000]   E8000-FFFFF write-protect                                     
[    0.000000] MTRR variable ranges enabled:                                   
[    0.000000]   0 base 000000000 mask FC0000000 write-back                    
[    0.000000]   1 base 03F700000 mask FFFF00000 write-through                 
[    0.000000]   2 base 03F800000 mask FFF800000 uncachable                    
[    0.000000]   3 disabled                                                    
[    0.000000]   4 disabled                                                    
[    0.000000]   5 disabled                                                    
[    0.000000]   6 disabled                                                    
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption                      
[    0.000000] modified physical RAM map:                                      
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)       
[    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)         
[    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)       
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)       
[    0.000000]  modified: 0000000000100000 - 000000003f36f000 (usable)         
[    0.000000]  modified: 000000003f36f000 - 000000003f3b6000 (ACPI NVS)       
[    0.000000]  modified: 000000003f3b6000 - 000000003f3cb000 (reserved)       
[    0.000000]  modified: 000000003f3cb000 - 000000003f3cc000 (usable)         
[    0.000000]  modified: 000000003f3cc000 - 000000003f3e5000 (reserved)       
[    0.000000]  modified: 000000003f3e5000 - 000000003f3f6000 (ACPI NVS)       
[    0.000000]  modified: 000000003f3f6000 - 000000003f414000 (reserved)       
[    0.000000]  modified: 000000003f414000 - 000000003f417000 (ACPI NVS)       
[    0.000000]  modified: 000000003f417000 - 000000003f421000 (ACPI data)      
[    0.000000]  modified: 000000003f421000 - 000000003f429000 (ACPI NVS)       
[    0.000000]  modified: 000000003f429000 - 000000003f60b000 (reserved)       
[    0.000000]  modified: 000000003f60b000 - 000000003f6f0000 (usable)         
[    0.000000]  modified: 000000003f6f0000 - 0000000040000000 (reserved)       
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)       
[    0.000000]  modified: 00000000fed00000 - 00000000fed01000 (reserved)       
[    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)       
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)       
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000          
[    0.000000]  0000000000 - 0000400000 page 4k                                
[    0.000000]  0000400000 - 0037400000 page 2M                                
[    0.000000]  0037400000 - 00377fe000 page 4k                                
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000       
[    0.000000] RAMDISK: 00e68000 - 00effa7f                                    
[    0.000000] ACPI: RSDP 000f0450 00024 (v02 ALASKA)                          
[    0.000000] ACPI: XSDT 3f417070 00064 (v01 _ASUS_ Notebook 01072009 AMI  00010013)                                                                          
[    0.000000] ACPI: FACP 3f41fac8 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)                                                                          
[    0.000000] ACPI: DSDT 3f417168 08959 (v02 ALASKA    A M I 00000000 INTL 20051117)                                                                          
[    0.000000] ACPI: FACS 3f422f80 00040                                       
[    0.000000] ACPI: APIC 3f41fbc0 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)                                                                          
[    0.000000] ACPI: MCFG 3f41fc38 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)                                                                          
[    0.000000] ACPI: RTCF 3f41fc78 00593 (v01  A1234 RTCONFIG 00000001 INTL 20051117)                                                                          
[    0.000000] ACPI: HPET 3f420210 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)                                                                          
[    0.000000] ACPI: SSDT 3f420248 00655 (v01  PmRef    CpuPm 00003000 INTL 20051117)                                                                          
[    0.000000] ACPI: SLIC 3f4208a0 00176 (v01 _ASUS_ Notebook 00000000      00000000)                                                                          
[    0.000000] ACPI: BGRT 3f420a18 0003C (v00 ALASKA    A M I 01072009 AMI  00010013)                                                                          
[    0.000000] ACPI: Local APIC address 0xfee00000                             
[    0.000000] 126MB HIGHMEM available.                                        
[    0.000000] 887MB LOWMEM available.                                         
[    0.000000]   mapped low ram: 0 - 377fe000                                  
[    0.000000]   low ram: 0 - 377fe000                                         
[    0.000000]   node 0 low ram: 00000000 - 377fe000                           
[    0.000000]   node 0 bootmap 00011000 - 00017f00                            
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]    
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]                                                                   
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]                                                                   
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]                                                                   
[    0.000000]   #3 [0000200000 - 0000744168]    TEXT DATA BSS ==> [0000200000 - 0000744168]                                                                   
[    0.000000]   #4 [0000e68000 - 0000effa7f]          RAMDISK ==> [0000e68000 - 0000effa7f]                                                                   
[    0.000000]   #5 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]                                                                   
[    0.000000]   #6 [0000745000 - 000074822e]              BRK ==> [0000745000 - 000074822e]                                                                   
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]                                                                   
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]                                                                   
[    0.000000] found SMP MP-table at [c00fcbd0] fcbd0                          
[    0.000000] Zone PFN ranges:                                                
[    0.000000]   DMA      0x00000010 -> 0x00001000                             
[    0.000000]   Normal   0x00001000 -> 0x000377fe                             
[    0.000000]   HighMem  0x000377fe -> 0x0003f6f0                             
[    0.000000] Movable zone start PFN for each node                            
[    0.000000] early_node_map[4] active PFN ranges                             
[    0.000000]     0: 0x00000010 -> 0x0000009e                                 
[    0.000000]     0: 0x00000100 -> 0x0003f36f                                 
[    0.000000]     0: 0x0003f3cb -> 0x0003f3cc                                 
[    0.000000]     0: 0x0003f60b -> 0x0003f6f0                                 
[    0.000000] On node 0 totalpages: 259043                                    
[    0.000000] free_area_init_node: node 0, pgdat c0621fe0, node_mem_map c1000200                                                                              
[    0.000000]   DMA zone: 32 pages used for memmap                            
[    0.000000]   DMA zone: 0 pages reserved                                    
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0                            
[    0.000000]   Normal zone: 1744 pages used for memmap                       
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31                      
[    0.000000]   HighMem zone: 254 pages used for memmap                       
[    0.000000]   HighMem zone: 31577 pages, LIFO batch:7                       
[    0.000000] Using APIC driver default                                       
[    0.000000] ACPI: PM-Timer IO Port: 0x408                                   
[    0.000000] ACPI: Local APIC address 0xfee00000                             
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)              
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)              
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)              
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)              
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])             
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])         
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23  
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)        
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)     
[    0.000000] ACPI: IRQ0 used by override.                                    
[    0.000000] ACPI: IRQ2 used by override.                                    
[    0.000000] ACPI: IRQ9 used by override.                                    
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs                   
[    0.000000] Using ACPI (MADT) for SMP configuration information             
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000                      
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs                            
[    0.000000] nr_irqs_gsi: 24                                                 
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)                                                                          
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1        
[    0.000000] PERCPU: Embedded 11 pages at c17f5000, static data 21820 bytes  
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257013                                                                     
[    0.000000] Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=b9b0ff7e-748a-43e3-81ef-6417defc239a panic=30 splash=silent quiet                    
[    0.000000] bootsplash: silent mode.                                        
[    0.000000] Enabling fast FPU save and restore... done.                     
[    0.000000] Enabling unmasked SIMD FPU exception support... done.           
[    0.000000] Initializing CPU#0                                              
[    0.000000] Experimental hierarchical RCU implementation.                   
[    0.000000] Experimental hierarchical RCU init done.                        
[    0.000000] NR_IRQS:2304 nr_irqs:440                                        
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)           
[    0.000000] Extended CMOS year: 2000                                        
[    0.000000] Fast TSC calibration using PIT                                  
[    0.000000] Detected 1596.392 MHz processor.                                
[   23.394883] Console: colour dummy device 80x25                              
[   23.394889] console [tty0] enabled                                          
[   23.394957] ram_console: buffer (null), invalid size 0, datasize 4294967284 
[   23.395279] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   23.396035] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)  
[   23.404469] allocated 5196160 bytes of page_cgroup                          
[   23.404473] please try cgroup_disable=memory option if you don't want       
[   23.428304] Initializing HighMem for node 0 (000377fe:0003f6f0)             
[   23.441879] Memory: 1015524k/1039296k available (2862k kernel code, 20240k reserved, 1415k data, 460k init, 127324k highmem)                                
[   23.441895] virtual kernel memory layout:                                   
[   23.441897]     fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)               
[   23.441900]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)               
[   23.441903]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)               
[   23.441905]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)               
[   23.441908]       .init : 0xc0635000 - 0xc06a8000   ( 460 kB)               
[   23.441910]       .data : 0xc04cb87d - 0xc062d828   (1415 kB)               
[   23.441913]       .text : 0xc0200000 - 0xc04cb87d   (2862 kB)               
[   23.441919] Checking if this processor honours the WP bit even in supervisor mode...Ok.                                                                     
[   23.442349] hpet clockevent registered                                      
[   23.442359] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[   23.442373] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.78 BogoMIPS (lpj=6385568)                                       
[   23.442456] Security Framework initialized                                  
[   23.442467] SELinux:  Disabled at boot.                                     
[   23.442507] Mount-cache hash table entries: 512                             
[   23.442712] Initializing cgroup subsys ns                                   
[   23.442720] Initializing cgroup subsys cpuacct                              
[   23.442727] Initializing cgroup subsys memory                               
[   23.442738] Initializing cgroup subsys devices                              
[   23.442742] Initializing cgroup subsys freezer                              
[   23.442747] Initializing cgroup subsys net_cls                              
[   23.442785] CPU: L1 I cache: 32K, L1 D cache: 24K                           
[   23.442790] CPU: L2 cache: 512K                                             
[   23.442795] CPU: Physical Processor ID: 0                                   
[   23.442798] CPU: Processor Core ID: 0                                       
[   23.442804] Intel machine check architecture supported.                     
[   23.442810] Intel machine check reporting enabled on CPU#0.                 
[   23.442814] using mwait in idle threads.                                    
[   23.442829] Checking 'hlt' instruction... <7>spurious 8259A interrupt: IRQ7.
[   23.458374] OK.                                                             
[   23.459023] ACPI: Core revision 20090320                                    
[   23.589704] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0              
[   23.629367] CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01       
[   23.734530] Booting processor 1 APIC 0x1 ip 0x6000                          
[   23.744556] Initializing CPU#1                                              
[   23.822083] Calibrating delay using timer specific routine.. 3192.60 BogoMIPS (lpj=6385219)                                                                 
[   23.822100] CPU: L1 I cache: 32K, L1 D cache: 24K                           
[   23.822106] CPU: L2 cache: 512K                                             
[   23.822111] CPU: Physical Processor ID: 0                                   
[   23.822115] CPU: Processor Core ID: 0                                       
[   23.822121] Intel machine check architecture supported.                     
[   23.822128] Intel machine check reporting enabled on CPU#1.                 
[   23.822383] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[   23.822798] CPU1: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01       
[   23.822825] Skipping synchronization checks as TSC is reliable.             
[   23.823070] Booting processor 2 APIC 0x2 ip 0x6000                          
[   23.833025] Initializing CPU#2                                              
[   23.910016] Calibrating delay using timer specific routine.. 3192.63 BogoMIPS (lpj=6385274)                                                                 
[   23.910031] CPU: L1 I cache: 32K, L1 D cache: 24K                           
[   23.910036] CPU: L2 cache: 512K                                             
[   23.910040] CPU: Physical Processor ID: 0                                   
[   23.910043] CPU: Processor Core ID: 1                                       
[   23.910048] Intel machine check architecture supported.                     
[   23.910053] Intel machine check reporting enabled on CPU#2.                 
[   23.910277] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[   23.910578] CPU2: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01       
[   23.910600] Skipping synchronization checks as TSC is reliable.             
[   23.910819] Booting processor 3 APIC 0x3 ip 0x6000                          
[   23.925298] Initializing CPU#3                                              
[   24.001946] Calibrating delay using timer specific routine.. 3192.63 BogoMIPS (lpj=6385279)                                                                 
[   24.001960] CPU: L1 I cache: 32K, L1 D cache: 24K                           
[   24.001964] CPU: L2 cache: 512K                                             
[   24.001968] CPU: Physical Processor ID: 0                                   
[   24.001971] CPU: Processor Core ID: 1                                       
[   24.001976] Intel machine check architecture supported.                     
[   24.001981] Intel machine check reporting enabled on CPU#3.                 
[   24.002206] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[   24.002559] CPU3: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01       
[   24.002583] Skipping synchronization checks as TSC is reliable.             
[   24.002611] Brought up 4 CPUs                                               
[   24.002617] Total of 4 processors activated (12770.67 BogoMIPS).            
[   24.002706] CPU0 attaching sched-domain:                                    
[   24.002713]  domain 0: span 0-1 level SIBLING                               
[   24.002719]   groups: 0 1                                                   
[   24.002727]   domain 1: span 0-3 level CPU                                   <

Данная команда - dmesg - выдала 15 страниц текста, наверное всё не вошло (

(II) VESA(0): Total Memory: 123 64KB banks (7872kB)
(II) VESA(0): <default monitor>: Using hsync value of 39.97 kHz
(II) VESA(0): <default monitor>: Using vrefresh value of 60.02 Hz
(WW) VESA(0): Unable to estimate virtual size                   
(II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(WW) VESA(0): No valid modes left. Trying less strict filter...      
(II) VESA(0): <default monitor>: Using hsync value of 39.97 kHz      
(II) VESA(0): <default monitor>: Using vrefresh value of 60.02 Hz    
(WW) VESA(0): Unable to estimate virtual size                        
(II) VESA(0): Not using built-in mode "800x600" (hsync out of range) 
(II) VESA(0): Not using built-in mode "640x480" (hsync out of range) 
(WW) VESA(0): No valid modes left. Trying aggressive sync range...   
(II) VESA(0): <default monitor>: Using hsync range of 31.50-39.97 kHz
(II) VESA(0): <default monitor>: Using vrefresh range of 50.00-60.02 Hz
(WW) VESA(0): Unable to estimate virtual size                         
(II) VESA(0): Not using built-in mode "640x480" (hsync out of range)  
(--) VESA(0): Virtual size is 800x600 (pitch 800)                     
(**) VESA(0): *Built-in mode "800x600"                                
(**) VESA(0): Display dimensions: (220, 130) mm                       
(**) VESA(0): DPI set to (92, 117)                                    
(II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115) 
(**) VESA(0): Using "Shadow Framebuffer"                              
(II) Loading sub module "shadow"                                      
(II) LoadModule: "shadow"                                             
(II) Loading /usr/lib/X11/modules/libshadow.so                        
(II) Module shadow: vendor="X.Org Foundation"                         
        compiled for 1.6.5, module version = 1.1.0                    
        ABI class: X.Org ANSI C Emulation, version 0.4                
(II) Loading sub module "fb"                                          
(II) LoadModule: "fb"                                                 
(II) Loading /usr/lib/X11/modules/libfb.so                            
(II) Module fb: vendor="X.Org Foundation"                             
        compiled for 1.6.5, module version = 1.0.0                    
        ABI class: X.Org ANSI C Emulation, version 0.4                
(II) UnloadModule: "intel"                                            
(II) Unloading /usr/lib/X11/modules/drivers/intel_drv.so              
(==) Depth 24 pixmap format is 32 bpp                                 
(II) do I need RAC?  No, I don't.                                     
(II) resource ranges after preInit:                                   
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]           
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]       
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]       
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]       
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]           
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]           
(II) Loading sub module "int10"                                       
(II) LoadModule: "int10"                                              
(II) Reloading /usr/lib/X11/modules/libint10.so                       
(II) VESA(0): initializing int10                                      
(II) VESA(0): Bad V_BIOS checksum                                     
(II) VESA(0): Primary V_BIOS segment is: 0xc000                       
(II) VESA(0): VESA BIOS detected                                      
(II) VESA(0): VESA VBE Version 3.0                                    
(II) VESA(0): VESA VBE Total Mem: 7872 kB                             
(II) VESA(0): VESA VBE OEM: Intel(R)XX Graphics Chipset Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0                               
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation                       
(II) VESA(0): VESA VBE OEM Product: Intel(R)XX Graphics Controller         
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0               
(II) VESA(0): virtual address = (nil),                                     
        physical address = 0x3f800000, size = 8060928                      
(II) VESA(0): virtual address = 0xb7922000,                                
        physical address = 0xa0000, size = 65536                           
(II) VESA(0): Setting up VESA Mode 0x115 (800x600)                         
(==) VESA(0): Default visual is TrueColor                                  
(==) VESA(0): Backing store disabled                                       
(II) VESA(0): DPMS enabled                                                 
(==) RandR enabled                                                         
(II) Initializing built-in extension Generic Event Extension               
(II) Initializing built-in extension SHAPE                                 
(II) Initializing built-in extension MIT-SHM                               
(II) Initializing built-in extension XInputExtension                       
(II) Initializing built-in extension XTEST                                 
(II) Initializing built-in extension BIG-REQUESTS                          
(II) Initializing built-in extension SYNC                                  
(II) Initializing built-in extension XKEYBOARD                             
(II) Initializing built-in extension XC-MISC                               
(II) Initializing built-in extension SECURITY                              
(II) Initializing built-in extension XINERAMA                              
(II) Initializing built-in extension XFIXES                                
(II) Initializing built-in extension RENDER                                
(II) Initializing built-in extension RANDR                                 
(II) Initializing built-in extension COMPOSITE                             
(II) Initializing built-in extension DAMAGE                                
(II) AIGLX: Screen 0 is not DRI2 capable                                   
(II) AIGLX: Screen 0 is not DRI capable                                    
(II) AIGLX: Loaded and initialized /usr/lib/X11/modules/dri/swrast_dri.so  
(II) GLX: Initialized DRISWRAST GL provider for screen 0                   
(II) config/hal: Adding input device Macintosh mouse button emulation      
(II) LoadModule: "evdev"                                                   
(II) Loading /usr/lib/X11/modules/input/evdev_drv.so                       
(II) Module evdev: vendor="X.Org Foundation"                               
        compiled for 1.6.5, module version = 2.2.6                         
        Module class: X.Org XInput Driver                                  
        ABI class: X.Org XInput driver, version 4.0                        

cat /var/log/Xorg.0.log - эта команда выдала 19 страниц текста, выбрал, на мой взгляд, нужный "кусок". А вначале было так -

        XResolution: 0                                                         
        YResolution: 0                                                         
        XCharSize: 0                                                           
        YCharSize: 0                                                           
        NumberOfPlanes: 0                                                      
        BitsPerPixel: 0                                                        
        NumberOfBanks: 0                                                       
        MemoryModel: 0                                                         
        BankSize: 0                                                            
        NumberOfImages: 0                                                      
        RedMaskSize: 0                                                         
        RedFieldPosition: 0                                                    
        GreenMaskSize: 0                                                       
        GreenFieldPosition: 0                                                  
        BlueMaskSize: 0                                                        
        BlueFieldPosition: 0                                                   
        RsvdMaskSize: 0                                                        
        RsvdFieldPosition: 0                                                   
        DirectColorModeInfo: 0                                                 
        PhysBasePtr: 0x0                                                       
        LinBytesPerScanLine: 0                                                 
        BnkNumberOfImagePages: 0                                               
        LinNumberOfImagePages: 0                                               
        LinRedMaskSize: 0                                                      
        LinRedFieldPosition: 0                                                 
        LinGreenMaskSize: 0                                                    
        LinGreenFieldPosition: 0                                               
        LinBlueMaskSize: 0                                                     
        LinBlueFieldPosition: 0                                                
        LinRsvdMaskSize: 0                                                     
        LinRsvdFieldPosition: 0                                                
        MaxPixelClock: 0                                                       
Mode: 170 (0x0)                                                                
        ModeAttributes: 0x0                                                    
        WinAAttributes: 0x0                                                    
        WinBAttributes: 0x0                                                    
        WinGranularity: 0                                                      
        WinSize: 0                                                             
        WinASegment: 0x0                                                       
        WinBSegment: 0x0                                                       
        WinFuncPtr: 0x0                                                        
        BytesPerScanline: 0                                                    
        XResolution: 0                                                         
        YResolution: 0                                                         
        XCharSize: 0                                                           
        YCharSize: 0                                                           
        NumberOfPlanes: 0                                                      
        BitsPerPixel: 0                                                        
        NumberOfBanks: 0                                                       
        MemoryModel: 0                                                         
        BankSize: 0                                                            
        NumberOfImages: 0                                                      
        RedMaskSize: 0                                                         
        RedFieldPosition: 0                                                    
        GreenMaskSize: 0                                                       
        GreenFieldPosition: 0                                                  
        BlueMaskSize: 0                                                        
        BlueFieldPosition: 0                                                   
        RsvdMaskSize: 0                                                        
        RsvdFieldPosition: 0                                                   
        DirectColorModeInfo: 0                                                 
        PhysBasePtr: 0x0                                                       
        LinBytesPerScanLine: 0                                                 
        BnkNumberOfImagePages: 0                                               
        LinNumberOfImagePages: 0                                               
        LinRedMaskSize: 0                                                      
        LinRedFieldPosition: 0                                                 
        LinGreenMaskSize: 0                                                    
        LinGreenFieldPosition: 0                                               
        LinBlueMaskSize: 0                                                     
        LinBlueFieldPosition: 0                                                
        LinRsvdMaskSize: 0                                                     
        LinRsvdFieldPosition: 0                                                
        MaxPixelClock: 0                                                       

Владимир Анненков писал(а):

А по видео... А что говорят

xrandr 

и

cat /etc/X11/xorg.conf

получается что сейчас vesa... можно попробовать fbdev.. главно не сломать что есть :)

Если я правильно понял, механизма чтобы просто доустановить систему с установочного DVD нет? Для меня сейчас приоритеты выглядят следующим образом - 1) Система, как с DVD, со всеми программами, а уже потом - видео, т.к. с разрешением 800Х600 жить можно )