Здравствуйте.МОУ лицей №6, г.Ессентуки.Бугун Михаил Анатольевич. При установке Alt Linux 5.0.4 легкий столкнулся с проблемой следующего характера. Недавно мы закупили несколько новых компьютеров и при установке линукса неопределяется сетевая карта на экране выбора сетевого интерфейса и ввода IP адреса,маски и т.д. Мат.плата Foxconn G41MD. При установке этого же дистрибутива на компьютеры 5-ти летней давности сетевая карта определялась без проблем. Подскажите пожалуйста в чем может быть дело. Далшье приведу логи команд lspci ,dmesg и lspci -v

 

[k1@comp Рабочий стол]$ lspci -v

03:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0)

 

            Subsystem: Foxconn International, Inc. Device 0dbe

 

            Flags: bus master, fast devsel, latency 0, IRQ 11

 

            Memory at febc0000 (64-bit, non-prefetchable) [size=256K]

 

            I/O ports at ec00 [size=128]

 

            Capabilities: <access denied>

 

[k1@comp Рабочий стол]$ lspci

 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)

 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)

 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)

 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)

 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)

 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)

 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)

 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)

 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)

 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)

 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)

 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)

 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)

 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)

 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)

 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)

 03:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0)

 

[k1@comp Рабочий стол]$ lsmod

Module                  Size  Used by

nls_utf8                1600  1

nls_cp866               4876  1

vfat                   10380  1

fat                    50252  1 vfat

nls_base                7056  4 nls_utf8,nls_cp866,vfat,fat

fuse                   58632  2

i915                  174696  1

drm                   158208  2 i915

i2c_algo_bit            5744  1 i915

video                  18304  1 i915

output                  2828  1 video

sunrpc                187488  1

dm_mod                 56708  0

snd_hda_codec_realtek   197616  1

snd_hda_intel          25928  0

snd_hda_codec          75148  2 snd_hda_codec_realtek,snd_hda_intel

snd_hwdep               7056  1 snd_hda_codec

snd_pcm                74096  2 snd_hda_intel,snd_hda_codec

snd_timer              20788  1 snd_pcm

snd                    58180  6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer

rtc_cmos               10316  0

rtc_core               17608  1 rtc_cmos

soundcore               7072  1 snd

rtc_lib                 2860  1 rtc_core

intel_agp              26268  1

snd_page_alloc          8852  2 snd_hda_intel,snd_pcm

agpgart                34796  3 drm,intel_agp

i2c_i801                9408  0

i2c_core               23584  4 i915,drm,i2c_algo_bit,i2c_i801

sr_mod                 15556  0

psmouse                56132  0

cdrom                  34752  1 sr_mod

processor              34496  0

sg                     28640  0

thermal                12808  0

button                  5244  0

evdev                   9472  6

pcspkr                  2316  0

serio_raw               5296  0

ohci_hcd               23100  0

uhci_hcd               22044  0

usbhid                 38944  0

hid                    65120  1 usbhid

ehci_hcd               35096  0

usb_storage            36032  1

usb_libusual           20352  1 usb_storage

usbcore               149232  7 ohci_hcd,uhci_hcd,usbhid,ehci_hcd,usb_storage,usb_libusual

ext3                  126868  2

jbd                    46048  1 ext3

mbcache                 7568  1 ext3

ata_generic             4624  0

ata_piix               23056  3

pata_acpi               3980  0

libata                174732  3 ata_generic,ata_piix,pata_acpi

sd_mod                 34856  6

crc_t10dif              1708  1 sd_mod

scsi_mod              150996  5 sr_mod,sg,usb_storage,libata,sd_mod

ide_gd_mod             23344  0

ide_generic             1936  0 [permanent]

ide_core              103592  2 ide_gd_mod,ide_generic

 

Пробовал скачать и установить драйвера, но с этим делом как то туговато получилось. Ладно, если бы была модель Realtek, но с атеросом сталкиваюсь впервые.

Лариса Горюнова писал(а):

У меня было такое пару раз. 

Оказалось, что материнской плате были "битые" конденсаторы, которые были возле pci слотов.

Материнские платы были новые. 

Сетевая карта определялась (был какой то "стандартный" реалтек), но вот модули для неё не загружались ни в какую. 

Поменял материнскую плату - и всё сразу завелось.

А вам могу посоветовать только поменять материнскую плату. Если же её поменять не представляется возможным, попробуйте переставлять сетевую карту в разные pci-слоты.

to Лариса Горюнова

а можно вывод команды

dmesg

сразу после загрузки

[k1@comp Рабочий стол]$ dmesg

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 2.6.30-std-def-alt15 (builder@apiary.orion.altlinux.org) (gcc version 4.3.2 0081105 (ALT Linux 4.3.2-alt13) (GCC) ) #1 SMP Mon Dec 14 08:45:48 UTC 2009

[    0.000000] KERNEL supported cpus:

[    0.000000]   Intel GenuineIntel

[    0.000000]   AMD AuthenticAMD

[    0.000000]   NSC Geode by NSC

[    0.000000]   Cyrix CyrixInstead

[    0.000000]   Centaur CentaurHauls

[    0.000000]   Transmeta GenuineTMx86

[    0.000000]   Transmeta TransmetaCPU

[    0.000000]   UMC UMC UMC UMC

[    0.000000] BIOS-provided physical RAM map:

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[    0.000000]  BIOS-e820: 0000000000100000 - 0000000077da0000 (usable)

[    0.000000]  BIOS-e820: 0000000077da0000 - 0000000077dae000 (ACPI data)

[    0.000000]  BIOS-e820: 0000000077dae000 - 0000000077df0000 (ACPI NVS)

[    0.000000]  BIOS-e820: 0000000077df0000 - 0000000077e00000 (reserved)

[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

[    0.000000] DMI present.

[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.

 

[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

 

[    0.000000] last_pfn = 0x77da0 max_arch_pfn = 0x100000

 

[    0.000000] MTRR default type: uncachable

 

[    0.000000] MTRR fixed ranges enabled:

 

[    0.000000]   00000-9FFFF write-back

 

[    0.000000]   A0000-BFFFF uncachable

 

[    0.000000]   C0000-CFFFF write-protect

 

[    0.000000]   D0000-DFFFF uncachable

 

[    0.000000]   E0000-EFFFF write-through

 

[    0.000000]   F0000-FFFFF write-protect

 

[    0.000000] MTRR variable ranges enabled:

 

[    0.000000]   0 base 000000000 mask F80000000 write-back

 

[    0.000000]   1 base 077E00000 mask FFFE00000 uncachable

 

[    0.000000]   2 base 078000000 mask FF8000000 uncachable

 

[    0.000000]   3 disabled

 

[    0.000000]   4 disabled

 

[    0.000000]   5 disabled

 

[    0.000000]   6 disabled

 

[    0.000000]   7 disabled

 

[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

 

[    0.000000] Scanning 0 areas for low memory corruption

 

[    0.000000] modified physical RAM map:

 

[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)

 

[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)

 

[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)

 

[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)

 

[    0.000000]  modified: 0000000000100000 - 0000000077da0000 (usable)

 

[    0.000000]  modified: 0000000077da0000 - 0000000077dae000 (ACPI data)

 

[    0.000000]  modified: 0000000077dae000 - 0000000077df0000 (ACPI NVS)

 

[    0.000000]  modified: 0000000077df0000 - 0000000077e00000 (reserved)

 

[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)

 

[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)

 

[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000

 

[    0.000000]  0000000000 - 0000400000 page 4k

 

[    0.000000]  0000400000 - 0037400000 page 2M

 

[    0.000000]  0037400000 - 00377fe000 page 4k

 

[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000

 

[    0.000000] RAMDISK: 00e1f000 - 00eff695

 

[    0.000000] ACPI: RSDP 000f94f0 00014 (v00 ACPIAM)

 

[    0.000000] ACPI: RSDT 77da0000 00044 (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: FACP 77da0200 00084 (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: DSDT 77da05c0 0618F (v01              A1 00000000 INTL 20051117)

 

[    0.000000] ACPI: FACS 77dae000 00040

 

[    0.000000] ACPI: APIC 77da0390 0006C (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: MCFG 77da0400 0003C (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: SLIC 77da0440 00176 (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: OEMB 77dae040 00072 (v01 032411 OEMB1335 20110324 MSFT 00000097)

 

[    0.000000] ACPI: HPET 77da85c0 00038 (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: GSCI 77dae0c0 02024 (v01 032411 GMCHSCI  20110324 MSFT 00000097)

 

[    0.000000] ACPI: SSDT 77db0670 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)

 

[    0.000000] ACPI: Local APIC address 0xfee00000

 

[    0.000000] 1029MB HIGHMEM available.

 

[    0.000000] 887MB LOWMEM available.

 

[    0.000000]   mapped low ram: 0 - 377fe000

 

[    0.000000]   low ram: 0 - 377fe000

 

[    0.000000]   node 0 low ram: 00000000 - 377fe000

 

[    0.000000]   node 0 bootmap 00011000 - 00017f00

 

[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]

 

[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]

 

[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]

 

[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]

 

[    0.000000]   #3 [0000200000 - 0000744168]    TEXT DATA BSS ==> [0000200000 - 0000744168]

 

[    0.000000]   #4 [0000e1f000 - 0000eff695]          RAMDISK ==> [0000e1f000 - 0000eff695]

 

[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]

 

[    0.000000]   #6 [0000745000 - 000074810f]              BRK ==> [0000745000 - 000074810f]

 

[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]

 

[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]

 

[    0.000000] found SMP MP-table at [c00ff780] ff780

 

[    0.000000] Zone PFN ranges:

 

[    0.000000]   DMA      0x00000010 -> 0x00001000

 

[    0.000000]   Normal   0x00001000 -> 0x000377fe

 

[    0.000000]   HighMem  0x000377fe -> 0x00077da0

 

[    0.000000] Movable zone start PFN for each node

 

[    0.000000] early_node_map[2] active PFN ranges

 

[    0.000000]     0: 0x00000010 -> 0x0000009f

 

[    0.000000]     0: 0x00000100 -> 0x00077da0

 

[    0.000000] On node 0 totalpages: 490799

 

[    0.000000] free_area_init_node: node 0, pgdat c0621fe0, node_mem_map c1000200

 

[    0.000000]   DMA zone: 32 pages used for memmap

 

[    0.000000]   DMA zone: 0 pages reserved

 

[    0.000000]   DMA zone: 3951 pages, LIFO batch:0

 

[    0.000000]   Normal zone: 1744 pages used for memmap

 

[    0.000000]   Normal zone: 221486 pages, LIFO batch:31

 

[    0.000000]   HighMem zone: 2060 pages used for memmap

 

[    0.000000]   HighMem zone: 261526 pages, LIFO batch:31

 

[    0.000000] Using APIC driver default

 

[    0.000000] ACPI: PM-Timer IO Port: 0x808

 

[    0.000000] ACPI: Local APIC address 0xfee00000

 

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

 

[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

 

[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)

 

[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)

 

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

 

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

 

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

 

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

 

[    0.000000] ACPI: IRQ0 used by override.

 

[    0.000000] ACPI: IRQ2 used by override.

 

[    0.000000] ACPI: IRQ9 used by override.

 

[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs

 

[    0.000000] Using ACPI (MADT) for SMP configuration information

 

[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

 

[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs

 

[    0.000000] nr_irqs_gsi: 24

 

[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

 

[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000

 

[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000

 

[    0.000000] Allocating PCI resources starting at 80000000 (gap: 77e00000:87000000)

 

[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1

 

[    0.000000] PERCPU: Embedded 11 pages at c1f0a000, static data 21820 bytes

 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 486963

 

[    0.000000] Kernel command line: auto BOOT_IMAGE=PSPO5 ro root=UUID=8e181fa2-d202-4d66-b65e-c9479a18fbc8 resume=/dev/disk/by-uuid/391867d7-d116-482d-8b28-7e6d6a951fa2 panic=30 splash=silent

 

[    0.000000] bootsplash: silent mode.

 

[    0.000000] Enabling fast FPU save and restore... done.

 

[    0.000000] Enabling unmasked SIMD FPU exception support... done.

 

[    0.000000] Initializing CPU#0

 

[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240

 

[    0.000000] Experimental hierarchical RCU implementation.

 

[    0.000000] Experimental hierarchical RCU init done.

 

[    0.000000] NR_IRQS:2304 nr_irqs:440

 

[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)

 

[    0.000000] Fast TSC calibration failed

 

[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops

 

[    0.000000] Detected 3000.054 MHz processor.

 

[    0.004000] Console: colour dummy device 80x25

 

[    0.004000] console [tty0] enabled

 

[    0.004000] ram_console: buffer (null), invalid size 0, datasize 4294967284

 

[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

 

[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

 

[    0.004000] allocated 9817920 bytes of page_cgroup

 

[    0.004000] please try cgroup_disable=memory option if you don't want

 

[    0.004000] Initializing HighMem for node 0 (000377fe:00077da0)

 

[    0.004000] Memory: 1929912k/1963648k available (2862k kernel code, 32296k reserved, 1415k data, 460k init, 1054344k highmem)

 

[    0.004000] virtual kernel memory layout:

 

[    0.004000]     fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)

 

[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)

 

[    0.004000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)

 

[    0.004000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)

 

[    0.004000]       .init : 0xc0635000 - 0xc06a8000   ( 460 kB)

 

[    0.004000]       .data : 0xc04cb87d - 0xc062d828   (1415 kB)

 

[    0.004000]       .text : 0xc0200000 - 0xc04cb87d   (2862 kB)

 

[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

 

[    0.004000] hpet clockevent registered

 

[    0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

 

[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.10 BogoMIPS (lpj=12000216)

 

[    0.004000] Security Framework initialized

 

[    0.004000] SELinux:  Disabled at boot.

 

[    0.004000] Mount-cache hash table entries: 512

 

[    0.004000] Initializing cgroup subsys ns

 

[    0.004000] Initializing cgroup subsys cpuacct

 

[    0.004000] Initializing cgroup subsys memory

 

[    0.004000] Initializing cgroup subsys devices

 

[    0.004000] Initializing cgroup subsys freezer

 

[    0.004000] Initializing cgroup subsys net_cls

 

[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K

 

[    0.004000] CPU: L2 cache: 2048K

 

[    0.004000] CPU: Physical Processor ID: 0

 

[    0.004000] CPU: Processor Core ID: 0

 

[    0.004000] Intel machine check architecture supported.

 

[    0.004000] Intel machine check reporting enabled on CPU#0.

 

[    0.004000] using mwait in idle threads.

 

[    0.004000] Checking 'hlt' instruction... OK.

 

[    0.016538] ACPI: Core revision 20090320

 

[    0.024353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

 

[    0.067457] CPU0: Intel Pentium(R) Dual-Core  CPU      E5700  @ 3.00GHz stepping 0a

 

[    0.068001] Booting processor 1 APIC 0x1 ip 0x6000

 

[    0.004000] Initializing CPU#1

 

[    0.004000] Calibrating delay using timer specific routine.. 6000.16 BogoMIPS (lpj=12000326)

 

[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K

 

[    0.004000] CPU: L2 cache: 2048K

 

[    0.004000] CPU: Physical Processor ID: 0

 

[    0.004000] CPU: Processor Core ID: 1

 

[    0.004000] Intel machine check architecture supported.

 

[    0.004000] Intel machine check reporting enabled on CPU#1.

 

[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106

 

[    0.157300] CPU1: Intel Pentium(R) Dual-Core  CPU      E5700  @ 3.00GHz stepping 0a

 

[    0.157324] checking TSC synchronization [CPU#0 -> CPU#1]: passed.

 

[    0.160024] Brought up 2 CPUs

 

[    0.160028] Total of 2 processors activated (12000.27 BogoMIPS).

 

[    0.160072] CPU0 attaching sched-domain:

 

[    0.160074]  domain 0: span 0-1 level MC

 

[    0.160076]   groups: 0 1

 

[    0.160079] CPU1 attaching sched-domain:

 

[    0.160080]  domain 0: span 0-1 level MC

 

[    0.160082]   groups: 1 0

 

[    0.160137] net_namespace: 1088 bytes

 

[    0.160137] regulator: core version 0.5

 

[    0.160137] NET: Registered protocol family 16

 

[    0.160137] EISA bus registered

 

[    0.160137] ACPI: bus type pci registered

 

[    0.160137] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

 

[    0.160137] PCI: Not using MMCONFIG.

 

[    0.160150] PCI: Using configuration type 1 for base access

 

[    0.160163] bio: create slab <bio-0> at 0

 

[    0.164040] ACPI: EC: Look up EC in DSDT

 

[    0.170114] ACPI: Interpreter enabled

 

[    0.170119] ACPI: (supports S0 S1 S3 S4 S5)

 

[    0.170137] ACPI: Using IOAPIC for interrupt routing

 

[    0.170181] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

 

[    0.174039] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources

 

[    0.174043] PCI: Using MMCONFIG for extended config space

 

[    0.180085] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 9B, should be 9A [20090320]

 

[    0.180847] ACPI: No dock devices found.

 

[    0.181006] ACPI: PCI Root Bridge [PCI0] (0000:00)

 

[    0.181025] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:01.0: PME# disabled

 

[    0.181025] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]

 

[    0.181025] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]

 

[    0.181025] pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07]

 

[    0.181025] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf8000-0xfeafbfff]

 

[    0.181025] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:1b.0: PME# disabled

 

[    0.181025] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:1c.0: PME# disabled

 

[    0.181025] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:1c.1: PME# disabled

 

[    0.181025] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f]

 

[    0.181025] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]

 

[    0.181025] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f]

 

[    0.181025] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]

 

[    0.181025] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeaf7c00-0xfeaf7fff]

 

[    0.181025] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:1d.7: PME# disabled

 

[    0.181025] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO

 

[    0.181025] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO

 

[    0.181025] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)

 

[    0.181025] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]

 

[    0.181025] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]

 

[    0.181025] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]

 

[    0.181025] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]

 

[    0.181025] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]

 

[    0.181025] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]

 

[    0.181025] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]

 

[    0.181025] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]

 

[    0.181025] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]

 

[    0.181025] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f]

 

[    0.181025] pci 0000:00:1f.2: PME# supported from D3hot

 

[    0.181025] pci 0000:00:1f.2: PME# disabled

 

[    0.181025] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]

 

[    0.181025] pci 0000:03:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]

 

[    0.181025] pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]

 

[    0.181054] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

 

[    0.181060] pci 0000:03:00.0: PME# disabled

 

[    0.188116] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]

 

[    0.188123] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]

 

[    0.188187] pci 0000:00:1e.0: transparent bridge

 

[    0.188219] pci_bus 0000:00: on NUMA node 0

 

[    0.188223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

 

[    0.188309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

 

[    0.188366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

 

[    0.188410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]

 

[    0.192427] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)

 

[    0.192427] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)

 

[    0.192427] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)

 

[    0.196096] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)

 

[    0.196190] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

 

[    0.196287] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

 

[    0.196384] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

 

[    0.196480] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)

 

[    0.196524] PCI: Using ACPI for IRQ routing

 

[    0.204016] NetLabel: Initializing

 

[    0.204023] NetLabel:  domain hash size = 128

 

[    0.204028] NetLabel:  protocols = UNLABELED CIPSOv4

 

[    0.204050] NetLabel:  unlabeled traffic allowed by default

 

[    0.204065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

 

[    0.204076] hpet0: 3 comparators, 64-bit 14.318180 MHz counter

 

[    0.219992] pnp: PnP ACPI init

 

[    0.220007] ACPI: bus type pnp registered

 

[    0.223573] pnp: PnP ACPI: found 17 devices

 

[    0.223576] ACPI: ACPI bus type pnp unregistered

 

[    0.223579] PnPBIOS: Disabled by ACPI PNP

 

[    0.223587] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved

 

[    0.223590] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved

 

[    0.223597] system 00:07: ioport range 0x4d0-0x4d1 has been reserved

 

[    0.223600] system 00:07: ioport range 0x800-0x87f has been reserved

 

[    0.223604] system 00:07: ioport range 0x480-0x4bf has been reserved

 

[    0.223607] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved

 

[    0.223611] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved

 

[    0.223614] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved

 

[    0.223620] system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved

 

[    0.223624] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved

 

[    0.223628] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved

 

[    0.223634] system 00:0e: ioport range 0xa00-0xa0f has been reserved

 

[    0.223637] system 00:0e: ioport range 0xa10-0xa1f has been reserved

 

[    0.223640] system 00:0e: ioport range 0xa20-0xa2f has been reserved

 

[    0.223643] system 00:0e: ioport range 0xa30-0xa3f has been reserved

 

[    0.223648] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved

 

[    0.223654] system 00:10: iomem range 0x0-0x9ffff could not be reserved

 

[    0.223657] system 00:10: iomem range 0xc0000-0xcffff could not be reserved

 

[    0.223660] system 00:10: iomem range 0xe0000-0xfffff could not be reserved

 

[    0.223664] system 00:10: iomem range 0x100000-0x77dfffff could not be reserved

 

[    0.223667] system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved

 

[    0.258414] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

 

[    0.258418] pci 0000:00:01.0:   IO window: disabled

 

[    0.258421] pci 0000:00:01.0:   MEM window: disabled

 

[    0.258425] pci 0000:00:01.0:   PREFETCH window: disabled

 

[    0.258429] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02

 

[    0.258431] pci 0000:00:1c.0:   IO window: disabled

 

[    0.258436] pci 0000:00:1c.0:   MEM window: disabled

 

[    0.258440] pci 0000:00:1c.0:   PREFETCH window: disabled

 

[    0.258445] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03

 

[    0.258449] pci 0000:00:1c.1:   IO window: 0xe000-0xefff

 

[    0.258454] pci 0000:00:1c.1:   MEM window: 0xfeb00000-0xfebfffff

 

[    0.258458] pci 0000:00:1c.1:   PREFETCH window: disabled

 

[    0.258464] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04

 

[    0.258466] pci 0000:00:1e.0:   IO window: disabled

 

[    0.258471] pci 0000:00:1e.0:   MEM window: disabled

 

[    0.258475] pci 0000:00:1e.0:   PREFETCH window: disabled

 

[    0.258484]   alloc irq_desc for 16 on cpu 0 node 0

 

[    0.258486]   alloc kstat_irqs on cpu 0 node 0

 

[    0.258489] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 

[    0.258493] pci 0000:00:01.0: setting latency timer to 64

 

[    0.258498] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 

[    0.258503] pci 0000:00:1c.0: setting latency timer to 64

 

[    0.258508]   alloc irq_desc for 17 on cpu 0 node 0

 

[    0.258509]   alloc kstat_irqs on cpu 0 node 0

 

[    0.258512] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

 

[    0.258516] pci 0000:00:1c.1: setting latency timer to 64

 

[    0.258521] pci 0000:00:1e.0: setting latency timer to 64

 

[    0.258524] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]

 

[    0.258526] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]

 

[    0.258528] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]

 

[    0.258530] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]

 

[    0.258532] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]

 

[    0.258533] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]

 

[    0.258567] NET: Registered protocol family 2

 

[    0.299998] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

 

[    0.300262] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

 

[    0.300642] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

 

[    0.300848] TCP: Hash tables configured (established 131072 bind 65536)

 

[    0.300851] TCP reno registered

 

[    0.307993] NET: Registered protocol family 1

[    0.308078] Trying to unpack rootfs image as initramfs...

 

[    0.326202] Freeing initrd memory: 897k freed

 

[    0.326919] Scanning for low memory corruption every 60 seconds

 

[    0.327103] audit: initializing netlink socket (disabled)

 

[    0.327117] type=2000 audit(1319040166.323:1): initialized

 

[    0.331085] highmem bounce pool size: 64 pages

 

[    0.331089] HugeTLB registered 4 MB page size, pre-allocated 0 pages

 

[    0.331150] VFS: Disk quotas dquot_6.5.2

 

[    0.331174] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

 

[    0.331215] msgmni has been set to 1713

 

[    0.331349] alg: No test for stdrng (krng)

 

[    0.331389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)

 

[    0.331393] io scheduler noop registered

 

[    0.331396] io scheduler anticipatory registered

 

[    0.331406] io scheduler cfq registered (default)

 

[    0.331419] pci 0000:00:02.0: Boot video device

 

[    0.331582]   alloc irq_desc for 24 on cpu 0 node 0

 

[    0.331584]   alloc kstat_irqs on cpu 0 node 0

 

[    0.331590] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X

 

[    0.331598] pcieport-driver 0000:00:01.0: setting latency timer to 64

 

[    0.331709]   alloc irq_desc for 25 on cpu 0 node 0

 

[    0.331711]   alloc kstat_irqs on cpu 0 node 0

 

[    0.331716] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X

 

[    0.331726] pcieport-driver 0000:00:1c.0: setting latency timer to 64

 

[    0.331869]   alloc irq_desc for 26 on cpu 0 node 0

 

[    0.331870]   alloc kstat_irqs on cpu 0 node 0

 

[    0.331876] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X

 

[    0.331886] pcieport-driver 0000:00:1c.1: setting latency timer to 64

 

[    0.332139] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3750k, total 131008k

 

[    0.332144] vesafb: mode is 800x600x16, linelength=1600, pages=135

 

[    0.332146] vesafb: scrolling: redraw

 

[    0.332149] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

 

[    0.332274] bootsplash 3.1.6-2004/03/31: looking for picture...

 

[    0.336502] bootsplash: silentjpeg size 61215 bytes

 

[    0.344086] bootsplash: ...found (800x600, 3750 bytes, v3).

 

[    0.365337] Console: switching to colour frame buffer device 97x34

 

[    0.396221] fb0: VESA VGA frame buffer device

 

[    0.396424] isapnp: Scanning for PnP cards...

 

[    0.501211] Switched to high resolution mode on CPU 1

 

[    0.503867] Switched to high resolution mode on CPU 0

 

[    0.706062] isapnp: No Plug & Play device found

 

[    0.727773] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

 

[    0.728243] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

 

[    0.728927] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

 

[    0.730268] brd: module loaded

 

[    0.730406] input: Macintosh mouse button emulation as /devices/virtual/input/input0

 

[    0.730703] Fixed MDIO Bus: probed

 

[    0.735409] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

 

[    0.740535] serio: i8042 KBD port at 0x60,0x64 irq 1

 

[    0.745329] serio: i8042 AUX port at 0x60,0x64 irq 12

 

[    0.750099] mice: PS/2 mouse device common for all mice

 

[    0.754808] EISA: Probing bus 0 at eisa.0

 

[    0.759403] cpuidle: using governor ladder

 

[    0.763922] cpuidle: using governor menu

 

[    0.768654] TCP bic registered

 

[    0.773002] Using IPI No-Shortcut mode

 

[    0.778996] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

 

[    0.787042] registered taskstats version 1

 

[    0.791670] Freeing unused kernel memory: 460k freed

 

[    0.796304] Write protecting the kernel text: 2864k

 

[    0.800776] Write protecting the kernel read-only data: 1220k

 

[    0.805276] Executing init=/init

 

[    0.987886] Uniform Multi-Platform E-IDE driver

 

[    0.998491] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports

 

[    1.014782] ide-gd driver 1.18

 

[    1.034098] SCSI subsystem initialized

 

[    1.052558] Driver 'sd' needs updating - please use bus_type methods

 

[    1.073556] libata version 3.00 loaded.

 

[    1.080644]   alloc irq_desc for 18 on cpu 0 node 0

 

[    1.080646]   alloc kstat_irqs on cpu 0 node 0

 

[    1.080652] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

 

[    1.085140] pata_acpi 0000:00:1f.1: setting latency timer to 64

 

[    1.085148] pata_acpi 0000:00:1f.1: PCI INT A disabled

 

[    1.089512]   alloc irq_desc for 19 on cpu 0 node 0

 

[    1.089514]   alloc kstat_irqs on cpu 0 node 0

 

[    1.089517] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

 

[    1.093970] pata_acpi 0000:00:1f.2: setting latency timer to 64

 

[    1.093977] pata_acpi 0000:00:1f.2: PCI INT B disabled

 

[    1.106135] ata_piix 0000:00:1f.1: version 2.13

 

[    1.106143] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

 

[    1.110516] ata_piix 0000:00:1f.1: setting latency timer to 64

 

[    1.110574] scsi0 : ata_piix

 

[    1.115461] scsi1 : ata_piix

 

[    1.120416] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14

 

[    1.124601] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15

 

[    1.128634] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

 

[    1.132643] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

 

[    1.136727] ata_piix 0000:00:1f.2: setting latency timer to 64

 

[    1.136783] scsi2 : ata_piix

 

[    1.141334] scsi3 : ata_piix

 

[    1.146198] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19

 

[    1.150272] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19

 

[    1.316483] ata3.00: ATA-8: ST500DM002-1BD142, KC43, max UDMA/133

 

[    1.320646] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)

 

[    1.340513] ata3.00: configured for UDMA/133

 

[    1.462733] scsi 2:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC43 PQ: 0 ANSI: 5

 

[    1.466958] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)

 

[    1.471157] sd 2:0:0:0: [sda] Write Protect is off

 

[    1.475277] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

 

[    1.475292] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

 

[    1.483886]  sda: sda1 sda2 sda4 < sda5 >

 

[    1.511948] sd 2:0:0:0: [sda] Attached SCSI disk

 

[    1.636152] ata4.01: NODEV after polling detection

 

[    1.644212] ata4.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100

 

[    1.668232] ata4.00: configured for UDMA/100

 

[    1.673785] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222AB  SB00 PQ: 0 ANSI: 5

 

[    1.730889] usbcore: registered new interface driver usbfs

 

[    1.735562] usbcore: registered new interface driver hub

 

[    1.740124] usbcore: registered new device driver usb

 

[    1.751264] usbcore: registered new interface driver libusual

 

[    1.765200] Initializing USB Mass Storage driver...

 

[    1.769563] usbcore: registered new interface driver usb-storage

 

[    1.773873] USB Mass Storage support registered.

 

[    1.786074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

 

[    1.790618]   alloc irq_desc for 23 on cpu 0 node 0

 

[    1.790620]   alloc kstat_irqs on cpu 0 node 0

 

[    1.790626] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23

 

[    1.795186] ehci_hcd 0000:00:1d.7: setting latency timer to 64

 

[    1.795189] ehci_hcd 0000:00:1d.7: EHCI Host Controller

 

[    1.799662] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1

 

[    1.808066] ehci_hcd 0000:00:1d.7: debug port 1

 

[    1.812546] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported

 

[    1.812559] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaf7c00

 

[    1.832533] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

 

[    1.837046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

 

[    1.841540] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    1.846057] usb usb1: Product: EHCI Host Controller

 

[    1.850557] usb usb1: Manufacturer: Linux 2.6.30-std-def-alt15 ehci_hcd

 

[    1.855220] usb usb1: SerialNumber: 0000:00:1d.7

 

[    1.859892] usb usb1: configuration #1 chosen from 1 choice

 

[    1.864611] hub 1-0:1.0: USB hub found

 

[    1.869184] hub 1-0:1.0: 8 ports detected

 

[    1.891251] usbcore: registered new interface driver hiddev

 

[    1.895882] usbcore: registered new interface driver usbhid

 

[    1.900300] usbhid: v2.6:USB HID core driver

 

[    1.911937] uhci_hcd: USB Universal Host Controller Interface driver

 

[    1.916347] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23

 

[    1.920733] uhci_hcd 0000:00:1d.0: setting latency timer to 64

 

[    1.920736] uhci_hcd 0000:00:1d.0: UHCI Host Controller

 

[    1.924976] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

 

[    1.929295] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880

 

[    1.933582] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

 

[    1.937881] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    1.942181] usb usb2: Product: UHCI Host Controller

 

[    1.946370] usb usb2: Manufacturer: Linux 2.6.30-std-def-alt15 uhci_hcd

 

[    1.950556] usb usb2: SerialNumber: 0000:00:1d.0

 

[    1.954976] usb usb2: configuration #1 chosen from 1 choice

 

[    1.959306] hub 2-0:1.0: USB hub found

 

[    1.963587] hub 2-0:1.0: 2 ports detected

 

[    1.968043] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

 

[    1.972382] uhci_hcd 0000:00:1d.1: setting latency timer to 64

 

[    1.972385] uhci_hcd 0000:00:1d.1: UHCI Host Controller

 

[    1.976735] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3

 

[    1.981046] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800

 

[    1.985241] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

 

[    1.989491] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    1.993753] usb usb3: Product: UHCI Host Controller

 

[    1.997980] usb usb3: Manufacturer: Linux 2.6.30-std-def-alt15 uhci_hcd

 

[    2.002319] usb usb3: SerialNumber: 0000:00:1d.1

 

[    2.006758] usb usb3: configuration #1 chosen from 1 choice

 

[    2.011207] hub 3-0:1.0: USB hub found

 

[    2.015523] hub 3-0:1.0: 2 ports detected

 

[    2.019853] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

 

[    2.024225] uhci_hcd 0000:00:1d.2: setting latency timer to 64

 

[    2.024228] uhci_hcd 0000:00:1d.2: UHCI Host Controller

 

[    2.028474] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4

 

[    2.032838] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480

 

[    2.037105] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

 

[    2.041484] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    2.045875] usb usb4: Product: UHCI Host Controller

 

[    2.050319] usb usb4: Manufacturer: Linux 2.6.30-std-def-alt15 uhci_hcd

 

[    2.054824] usb usb4: SerialNumber: 0000:00:1d.2

 

[    2.059339] usb usb4: configuration #1 chosen from 1 choice

 

[    2.063881] hub 4-0:1.0: USB hub found

 

[    2.068302] hub 4-0:1.0: 2 ports detected

 

[    2.072772] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16

 

[    2.077301] uhci_hcd 0000:00:1d.3: setting latency timer to 64

 

[    2.077304] uhci_hcd 0000:00:1d.3: UHCI Host Controller

 

[    2.081666] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5

 

[    2.086131] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400

 

[    2.090467] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

 

[    2.094838] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    2.099212] usb usb5: Product: UHCI Host Controller

 

[    2.103569] usb usb5: Manufacturer: Linux 2.6.30-std-def-alt15 uhci_hcd

 

[    2.108002] usb usb5: SerialNumber: 0000:00:1d.3

 

[    2.112545] usb usb5: configuration #1 chosen from 1 choice

 

[    2.117110] hub 5-0:1.0: USB hub found

 

[    2.121547] hub 5-0:1.0: 2 ports detected

 

[    2.135219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

 

[    2.184519] usb 1-3: new high speed USB device using ehci_hcd and address 2

 

[    2.322804] usb 1-3: New USB device found, idVendor=058f, idProduct=6364

 

[    2.327677] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

 

[    2.332512] usb 1-3: Product: Mass Storage Device

 

[    2.336993] usb 1-3: Manufacturer: Generic

 

[    2.341389] usb 1-3: SerialNumber: 058F63646476

 

[    2.345954] usb 1-3: configuration #1 chosen from 1 choice

 

[    2.350634] scsi4 : SCSI emulation for USB Mass Storage devices

 

[    2.355321] usb-storage: device found at 2

 

[    2.355323] usb-storage: waiting for device to settle before scanning

 

[    2.356252] generic-usb: probe of 0003:058F:6364.0001 failed with error -22

 

[    2.478280] PM: Starting manual resume from disk

 

[    2.518052] kjournald starting.  Commit interval 5 seconds

 

[    2.522788] EXT3-fs: mounted filesystem with writeback data mode.

 

[    3.962677] input: PC Speaker as /devices/platform/pcspkr/input/input2

 

[    3.965900] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

 

[    3.965994] ACPI: Power Button [PWRF]

 

[    3.966051] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4

 

[    3.966072] ACPI: Power Button [PWRB]

 

[    3.973695] sd 2:0:0:0: Attached scsi generic sg0 type 0

 

[    3.973721] scsi 3:0:0:0: Attached scsi generic sg1 type 5

 

[    3.976463] ACPI: SSDT 77db00f0 002B9 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)

 

[    3.976766] processor ACPI_CPU:00: registered as cooling_device0

 

[    3.976874] thermal LNXTHERM:01: registered as thermal_zone0

 

[    3.976880] ACPI: Thermal Zone [THRM] (40 C)

 

[    3.977303] ACPI: SSDT 77db03b0 002B9 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)

 

[    3.977509] processor ACPI_CPU:01: registered as cooling_device1

 

[    3.987118] Driver 'sr' needs updating - please use bus_type methods

 

[    3.991198] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

 

[    3.991202] Uniform CD-ROM driver Revision: 3.20

 

[    3.991286] sr 3:0:0:0: Attached scsi CD-ROM sr0

 

[    4.022085] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19

 

[    4.025290] Linux agpgart interface v0.103

 

[    4.048094] agpgart-intel 0000:00:00.0: Intel G41 Chipset

 

[    4.048640] agpgart-intel 0000:00:00.0: detected 131068K stolen memory

 

[    4.050641] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000

 

[    4.066473] rtc_cmos 00:03: RTC can wake from S4

 

[    4.066574] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

 

[    4.066598] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

 

[    4.119514] psmouse serio1: ID: 10 00 64

 

[    4.296443] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 

[    4.296460] HDA Intel 0000:00:1b.0: setting latency timer to 64

 

[    4.368520] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...

 

[    4.369767] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5

 

[    4.817466] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6

 

[    4.881218] Adding 3863592k swap on /dev/sda1.  Priority:-1 extents:1 across:3863592k

 

[    4.979722] EXT3 FS on sda2, internal journal

 

[    6.687146] device-mapper: uevent: version 1.0.3

 

[    6.687416] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com

 

[    7.225021] kjournald starting.  Commit interval 5 seconds

 

[    7.225433] EXT3 FS on sda5, internal journal

 

[    7.225439] EXT3-fs: mounted filesystem with writeback data mode.

 

[    7.353303] scsi 4:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0

 

[    7.353511] sd 4:0:0:0: Attached scsi generic sg2 type 0

 

[    7.354166] scsi 4:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0

 

[    7.354317] sd 4:0:0:1: Attached scsi generic sg3 type 0

 

[    7.354970] sd 4:0:0:0: [sdb] Attached SCSI removable disk

 

[    7.355408] scsi 4:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0

 

[    7.355545] sd 4:0:0:2: Attached scsi generic sg4 type 0

 

[    7.356209] sd 4:0:0:1: [sdc] Attached SCSI removable disk

 

[    7.356778] scsi 4:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS

 

[    7.356915] sd 4:0:0:3: Attached scsi generic sg5 type 0

 

[    7.357847] sd 4:0:0:2: [sdd] Attached SCSI removable disk

 

[    7.358388] usb-storage: device scan complete

 

[    7.358468] sd 4:0:0:3: [sde] Attached SCSI removable disk

 

[   15.029037] RPC: Registered udp transport module.

 

[   15.029039] RPC: Registered tcp transport module.

 

[   37.378860] [drm] Initialized drm 1.1.0 20060810

 

[   37.386541] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 

[   37.386545] pci 0000:00:02.0: setting latency timer to 64

 

[   37.388228]   alloc irq_desc for 27 on cpu 0 node 0

 

[   37.388232]   alloc kstat_irqs on cpu 0 node 0

 

[   37.388239] pci 0000:00:02.0: irq 27 for MSI/MSI-X

 

[   37.388309] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

 

[   55.426996] fuse init (API version 7.12)

 

[   91.000018] usb 1-7: new high speed USB device using ehci_hcd and address 3

 

[   91.138098] usb 1-7: New USB device found, idVendor=0951, idProduct=1625

 

[   91.138103] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3

 

[   91.138108] usb 1-7: Product: DT 101 II

 

[   91.138111] usb 1-7: Manufacturer: Kingston

 

[   91.138114] usb 1-7: SerialNumber: 001CC0EC3467EA606000006A

 

[   91.138295] usb 1-7: configuration #1 chosen from 1 choice

 

[   91.138604] scsi5 : SCSI emulation for USB Mass Storage devices

 

[   91.138693] usb-storage: device found at 3

 

[   91.138695] usb-storage: waiting for device to settle before scanning

 

[   96.172103] scsi 5:0:0:0: Direct-Access     Kingston DT 101 II        PMAP PQ: 0 ANSI: 0 CCS

 

[   96.172284] sd 5:0:0:0: Attached scsi generic sg6 type 0

 

[   97.252356] sd 5:0:0:0: [sdf] 7835648 512-byte hardware sectors: (4.01 GB/3.73 GiB)

 

[   97.254845] sd 5:0:0:0: [sdf] Write Protect is off

 

[   97.254850] sd 5:0:0:0: [sdf] Mode Sense: 03 41 00 00

 

[   97.254854] sd 5:0:0:0: [sdf] Assuming drive cache: write through

 

[   97.254942] usb-storage: device scan complete

 

[   97.260209] sd 5:0:0:0: [sdf] Assuming drive cache: write through

 

[   97.260218]  sdf: sdf1

 

[   97.287648] sd 5:0:0:0: [sdf] Attached SCSI removable disk

 

[   97.475595] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

 

[ 2919.073680] usb 1-7: USB disconnect, address 3

 

[ 3257.384015] usb 1-7: new high speed USB device using ehci_hcd and address 4

 

[ 3257.522040] usb 1-7: New USB device found, idVendor=0951, idProduct=1625

 

[ 3257.522046] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3

 

[ 3257.522050] usb 1-7: Product: DT 101 II

 

[ 3257.522053] usb 1-7: Manufacturer: Kingston

 

[ 3257.522056] usb 1-7: SerialNumber: 001CC0EC3467EA606000006A

 

[ 3257.522236] usb 1-7: configuration #1 chosen from 1 choice

 

[ 3257.522539] scsi6 : SCSI emulation for USB Mass Storage devices

 

[ 3257.522641] usb-storage: device found at 4

 

[ 3257.522642] usb-storage: waiting for device to settle before scanning

 

[ 3262.556169] scsi 6:0:0:0: Direct-Access     Kingston DT 101 II        PMAP PQ: 0 ANSI: 0 CCS

 

[ 3262.556352] sd 6:0:0:0: Attached scsi generic sg6 type 0

 

[ 3262.556535] usb-storage: device scan complete

 

[ 3263.636542] sd 6:0:0:0: [sdf] 7835648 512-byte hardware sectors: (4.01 GB/3.73 GiB)

 

[ 3263.639025] sd 6:0:0:0: [sdf] Write Protect is off

 

[ 3263.639030] sd 6:0:0:0: [sdf] Mode Sense: 03 41 00 00

 

[ 3263.639034] sd 6:0:0:0: [sdf] Assuming drive cache: write through

 

[ 3263.644401] sd 6:0:0:0: [sdf] Assuming drive cache: write through

 

[ 3263.644409]  sdf: sdf1

 

[ 3263.671837] sd 6:0:0:0: [sdf] Attached SCSI removable disk

 

[ 3263.798176] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

 

Было бы 2 или 3 компа можно и вставить сетевую, но их 10 штук, а предвидется еще закупка компьютеров и каждый раз покупать сетевые карты это как то не радует. Сами понимаете:лишние расходы школе и тд.и т.п.

Лариса Горюнова писал(а):

Гарантия пропадет если я вскрою системник вот в чем дело, я тоже думал вставить сетевуху и обновить. А ссылка на линукс вот http://www.spohelp.ru/administrator/posts/486-v...

modprobe atl9c

PS Это не Alt, а ПСПО

Плохо то, что и пр установке старого линукса 5.0 тоже сетевую не видит в упор

Viktor писал(а):

Для последних Atheros хорошо помогает http://www.spohelp.ru/forums/13-drayvery-i-linu...

А 1083 это ID устройства.

P. S. В ПСПО 5.0.4 kernel-headers-modules установлен по умолчанию.

Viktor писал(а):

Ирина Боркунова писал(а):

Лариса Горюнова писал(а):