Поставил дистрибутив Альт Линукс 5.0 Новый легкий и все заработало.Всем спасибо за помощь

Спасибо за совет. буду пробовать

Здравствуйте!

столкнулся со следующей проблемой. Недавно получили несколько компьютеров HP Pro 3300 Series MT: видео-встроенное, сетевая тоже.не буду описывать проблемы связанные с установкой XP, но там все получилось. А вот при установке Alt Linux 5.0.2 легкий возникла проблема с сетевой картой:

на этапе установки на 9-м шаге, где необходимо прописать IP адрес, маску и шлюз сетевая определялась нормально и даже было написано, что кабель подсоединен.

НО, по окончании установки зашел в Ethernet-интерфейсы и вижу следующую картину и немного не понял прикола так сказать.

начал лазить по интернету в поисках ответа. нашел где то, что в /etc/net/ifaces усть файл options

лог файла

NM_CONTROLLED=yes
DISABLED=yes
TYPE=eth
OOTPROTO=static

думал если изменить вторую строчку то заработает, но ничего не произошло.

решил проверить через терминал, что творится с компьютером.

вот лог команд

[root@Do-uch3 eth0]# dmesg | grep -i eth
[   17.848267] Driver 'sd' needs updating - please use bus_type methods
[   20.476027] Driver 'sr' needs updating - please use bus_type methods
[   20.524899] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   20.525182] eth0: RTL8169 at 0xf8920000, 2c:27:d7:3a:54:8f, XID 2c200000 IRQ 36
[   32.010377] r8169: eth0: unknown chipset (mac_version = 1).
[   32.010382] r8169: eth0: link down
[   41.118092] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   45.155579] r8169: eth0: unknown chipset (mac_version = 1).
[   45.155585] r8169: eth0: link down
[  208.871083] r8169: eth0: unknown chipset (mac_version = 1).
[  208.871089] r8169: eth0: link down
[  428.480594] r8169: eth0: unknown chipset (mac_version = 1).
[  428.480600] r8169: eth0: link down

 

[root@do-uch5 ~]# lspci -k | grep -i net -A 2
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    Subsystem: Hewlett-Packard Company Device 2abf
    Kernel driver in use: r8169
[root@do-uch5 ~]# /sbin/ifconfig -a
eth0      Link encap:Ethernet  HWaddr 2C:27:D7:3A:4B:0C 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:2604 errors:0 dropped:207742464 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:247498 (241.6 KiB)  TX bytes:0 (0.0 b)
          Interrupt:36 Base address:0x4000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3774 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3774 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:289269 (282.4 KiB)  TX bytes:289269 (282.4 KiB)

[root@do-uch5 ~]# lspci | grep -i Eth
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

 

[root@do-uch5 ~]# lspci -v

Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    Subsystem: Hewlett-Packard Company Device 2abf
    Flags: bus master, fast devsel, latency 0, IRQ 36
    I/O ports at e000 [size=256]
    Memory at fe400000 (64-bit, non-prefetchable) [size=4K]
    Memory at d0000000 (64-bit, prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Mask- 64bit+ Count=1/1 Enable+
    Capabilities: [70] Express Endpoint, MSI 01
    Capabilities: [b0] MSI-X: Enable- Mask- TabSize=4
    Capabilities: [d0] Vital Product Data
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Virtual Channel <?>
    Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-01
    Kernel driver in use: r8169
    Kernel modules: r8169

[root@do-uch5 ~]# uname -a
Linux do-uch5.localdomain 2.6.30-std-def-alt15 #1 SMP Mon Dec 14 08:45:48 UTC 2009 i686 GNU/Linux

после команды lspci -v заметил , что в ядре драйвер от другой сетевой.

подскажите, что делать? выгрузить модуль r8169 из ядра и поставить драйвера на r8168? или обновить ядро? только я этого никогда не делал, а в интернете все такие заумники и команды дают какие то бредовые.я их пытаюсь вводить и так и эдак но не получается.

заранне благодарен. Миша

Илья Барабаш писал(а):

Всем спасибо за помощь

Ирина Боркунова писал(а):

Алексей Зинченко писал(а):

Ирина Боркунова писал(а):

Viktor писал(а):

Viktor писал(а):

Плохо то, что и пр установке старого линукса 5.0 тоже сетевую не видит в упор

Гарантия пропадет если я вскрою системник вот в чем дело, я тоже думал вставить сетевуху и обновить. А ссылка на линукс вот http://www.spohelp.ru/administrator/posts/486-v...

Было бы 2 или 3 компа можно и вставить сетевую, но их 10 штук, а предвидется еще закупка компьютеров и каждый раз покупать сетевые карты это как то не радует. Сами понимаете:лишние расходы школе и тд.и т.п.

[   91.138108] usb 1-7: Product: DT 101 II

 

[   91.138111] usb 1-7: Manufacturer: Kingston

 

[   91.138114] usb 1-7: SerialNumber: 001CC0EC3467EA606000006A

 

[   91.138295] usb 1-7: configuration #1 chosen from 1 choice

 

[   91.138604] scsi5 : SCSI emulation for USB Mass Storage devices

 

[   91.138693] usb-storage: device found at 3

 

[   91.138695] usb-storage: waiting for device to settle before scanning

 

[   96.172103] scsi 5:0:0:0: Direct-Access     Kingston DT 101 II        PMAP PQ: 0 ANSI: 0 CCS

 

[   96.172284] sd 5:0:0:0: Attached scsi generic sg6 type 0

 

[   97.252356] sd 5:0:0:0: [sdf] 7835648 512-byte hardware sectors: (4.01 GB/3.73 GiB)

 

[   97.254845] sd 5:0:0:0: [sdf] Write Protect is off

 

[   97.254850] sd 5:0:0:0: [sdf] Mode Sense: 03 41 00 00

 

[   97.254854] sd 5:0:0:0: [sdf] Assuming drive cache: write through

 

[   97.254942] usb-storage: device scan complete

 

[   97.260209] sd 5:0:0:0: [sdf] Assuming drive cache: write through

 

[   97.260218]  sdf: sdf1

 

[   97.287648] sd 5:0:0:0: [sdf] Attached SCSI removable disk

 

[   97.475595] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

 

[ 2919.073680] usb 1-7: USB disconnect, address 3

 

[ 3257.384015] usb 1-7: new high speed USB device using ehci_hcd and address 4

 

[ 3257.522040] usb 1-7: New USB device found, idVendor=0951, idProduct=1625

 

[ 3257.522046] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3

 

[ 3257.522050] usb 1-7: Product: DT 101 II

 

[ 3257.522053] usb 1-7: Manufacturer: Kingston

 

[ 3257.522056] usb 1-7: SerialNumber: 001CC0EC3467EA606000006A

 

[ 3257.522236] usb 1-7: configuration #1 chosen from 1 choice

 

[ 3257.522539] scsi6 : SCSI emulation for USB Mass Storage devices

 

[ 3257.522641] usb-storage: device found at 4

 

[ 3257.522642] usb-storage: waiting for device to settle before scanning

 

[ 3262.556169] scsi 6:0:0:0: Direct-Access     Kingston DT 101 II        PMAP PQ: 0 ANSI: 0 CCS

 

[ 3262.556352] sd 6:0:0:0: Attached scsi generic sg6 type 0

 

[ 3262.556535] usb-storage: device scan complete

 

[ 3263.636542] sd 6:0:0:0: [sdf] 7835648 512-byte hardware sectors: (4.01 GB/3.73 GiB)

 

[ 3263.639025] sd 6:0:0:0: [sdf] Write Protect is off

 

[ 3263.639030] sd 6:0:0:0: [sdf] Mode Sense: 03 41 00 00

 

[ 3263.639034] sd 6:0:0:0: [sdf] Assuming drive cache: write through

 

[ 3263.644401] sd 6:0:0:0: [sdf] Assuming drive cache: write through

 

[ 3263.644409]  sdf: sdf1

 

[ 3263.671837] sd 6:0:0:0: [sdf] Attached SCSI removable disk

 

[ 3263.798176] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

 

[    4.066574] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

 

[    4.066598] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

 

[    4.119514] psmouse serio1: ID: 10 00 64

 

[    4.296443] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 

[    4.296460] HDA Intel 0000:00:1b.0: setting latency timer to 64

 

[    4.368520] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...

 

[    4.369767] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5

 

[    4.817466] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6

 

[    4.881218] Adding 3863592k swap on /dev/sda1.  Priority:-1 extents:1 across:3863592k

 

[    4.979722] EXT3 FS on sda2, internal journal

 

[    6.687146] device-mapper: uevent: version 1.0.3

 

[    6.687416] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com

 

[    7.225021] kjournald starting.  Commit interval 5 seconds

 

[    7.225433] EXT3 FS on sda5, internal journal

 

[    7.225439] EXT3-fs: mounted filesystem with writeback data mode.

 

[    7.353303] scsi 4:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0

 

[    7.353511] sd 4:0:0:0: Attached scsi generic sg2 type 0

 

[    7.354166] scsi 4:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0

 

[    7.354317] sd 4:0:0:1: Attached scsi generic sg3 type 0

 

[    7.354970] sd 4:0:0:0: [sdb] Attached SCSI removable disk

 

[    7.355408] scsi 4:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0

 

[    7.355545] sd 4:0:0:2: Attached scsi generic sg4 type 0

 

[    7.356209] sd 4:0:0:1: [sdc] Attached SCSI removable disk

 

[    7.356778] scsi 4:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS

 

[    7.356915] sd 4:0:0:3: Attached scsi generic sg5 type 0

 

[    7.357847] sd 4:0:0:2: [sdd] Attached SCSI removable disk

 

[    7.358388] usb-storage: device scan complete

 

[    7.358468] sd 4:0:0:3: [sde] Attached SCSI removable disk

 

[   15.029037] RPC: Registered udp transport module.

 

[   15.029039] RPC: Registered tcp transport module.

 

[   37.378860] [drm] Initialized drm 1.1.0 20060810

 

[   37.386541] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 

[   37.386545] pci 0000:00:02.0: setting latency timer to 64

 

[   37.388228]   alloc irq_desc for 27 on cpu 0 node 0

 

[   37.388232]   alloc kstat_irqs on cpu 0 node 0

 

[   37.388239] pci 0000:00:02.0: irq 27 for MSI/MSI-X

 

[   37.388309] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

 

[   55.426996] fuse init (API version 7.12)

 

[   91.000018] usb 1-7: new high speed USB device using ehci_hcd and address 3

 

[   91.138098] usb 1-7: New USB device found, idVendor=0951, idProduct=1625

 

[   91.138103] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3

 

[    2.072772] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16

 

[    2.077301] uhci_hcd 0000:00:1d.3: setting latency timer to 64

 

[    2.077304] uhci_hcd 0000:00:1d.3: UHCI Host Controller

 

[    2.081666] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5

 

[    2.086131] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400

 

[    2.090467] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

 

[    2.094838] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    2.099212] usb usb5: Product: UHCI Host Controller

 

[    2.103569] usb usb5: Manufacturer: Linux 2.6.30-std-def-alt15 uhci_hcd

 

[    2.108002] usb usb5: SerialNumber: 0000:00:1d.3

 

[    2.112545] usb usb5: configuration #1 chosen from 1 choice

 

[    2.117110] hub 5-0:1.0: USB hub found

 

[    2.121547] hub 5-0:1.0: 2 ports detected

 

[    2.135219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

 

[    2.184519] usb 1-3: new high speed USB device using ehci_hcd and address 2

 

[    2.322804] usb 1-3: New USB device found, idVendor=058f, idProduct=6364

 

[    2.327677] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

 

[    2.332512] usb 1-3: Product: Mass Storage Device

 

[    2.336993] usb 1-3: Manufacturer: Generic

 

[    2.341389] usb 1-3: SerialNumber: 058F63646476

 

[    2.345954] usb 1-3: configuration #1 chosen from 1 choice

 

[    2.350634] scsi4 : SCSI emulation for USB Mass Storage devices

 

[    2.355321] usb-storage: device found at 2

 

[    2.355323] usb-storage: waiting for device to settle before scanning

 

[    2.356252] generic-usb: probe of 0003:058F:6364.0001 failed with error -22

 

[    2.478280] PM: Starting manual resume from disk

 

[    2.518052] kjournald starting.  Commit interval 5 seconds

 

[    2.522788] EXT3-fs: mounted filesystem with writeback data mode.

 

[    3.962677] input: PC Speaker as /devices/platform/pcspkr/input/input2

 

[    3.965900] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

 

[    3.965994] ACPI: Power Button [PWRF]

 

[    3.966051] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4

 

[    3.966072] ACPI: Power Button [PWRB]

 

[    3.973695] sd 2:0:0:0: Attached scsi generic sg0 type 0

 

[    3.973721] scsi 3:0:0:0: Attached scsi generic sg1 type 5

 

[    3.976463] ACPI: SSDT 77db00f0 002B9 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)

 

[    3.976766] processor ACPI_CPU:00: registered as cooling_device0

 

[    3.976874] thermal LNXTHERM:01: registered as thermal_zone0

 

[    3.976880] ACPI: Thermal Zone [THRM] (40 C)

 

[    3.977303] ACPI: SSDT 77db03b0 002B9 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)

 

[    3.977509] processor ACPI_CPU:01: registered as cooling_device1

 

[    3.987118] Driver 'sr' needs updating - please use bus_type methods

 

[    3.991198] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

 

[    3.991202] Uniform CD-ROM driver Revision: 3.20

 

[    3.991286] sr 3:0:0:0: Attached scsi CD-ROM sr0

 

[    4.022085] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19

 

[    4.025290] Linux agpgart interface v0.103

 

[    4.048094] agpgart-intel 0000:00:00.0: Intel G41 Chipset

 

[    4.048640] agpgart-intel 0000:00:00.0: detected 131068K stolen memory

 

[    4.050641] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000

 

[    4.066473] rtc_cmos 00:03: RTC can wake from S4

 

[    1.846057] usb usb1: Product: EHCI Host Controller

 

[    1.850557] usb usb1: Manufacturer: Linux 2.6.30-std-def-alt15 ehci_hcd

 

[    1.855220] usb usb1: SerialNumber: 0000:00:1d.7

 

[    1.859892] usb usb1: configuration #1 chosen from 1 choice

 

[    1.864611] hub 1-0:1.0: USB hub found

 

[    1.869184] hub 1-0:1.0: 8 ports detected

 

[    1.891251] usbcore: registered new interface driver hiddev

 

[    1.895882] usbcore: registered new interface driver usbhid

 

[    1.900300] usbhid: v2.6:USB HID core driver

 

[    1.911937] uhci_hcd: USB Universal Host Controller Interface driver

 

[    1.916347] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23

 

[    1.920733] uhci_hcd 0000:00:1d.0: setting latency timer to 64

 

[    1.920736] uhci_hcd 0000:00:1d.0: UHCI Host Controller

 

[    1.924976] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

 

[    1.929295] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880

 

[    1.933582] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

 

[    1.937881] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    1.942181] usb usb2: Product: UHCI Host Controller

 

[    1.946370] usb usb2: Manufacturer: Linux 2.6.30-std-def-alt15 uhci_hcd

 

[    1.950556] usb usb2: SerialNumber: 0000:00:1d.0

 

[    1.954976] usb usb2: configuration #1 chosen from 1 choice

 

[    1.959306] hub 2-0:1.0: USB hub found

 

[    1.963587] hub 2-0:1.0: 2 ports detected

 

[    1.968043] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

 

[    1.972382] uhci_hcd 0000:00:1d.1: setting latency timer to 64

 

[    1.972385] uhci_hcd 0000:00:1d.1: UHCI Host Controller

 

[    1.976735] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3

 

[    1.981046] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800

 

[    1.985241] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

 

[    1.989491] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    1.993753] usb usb3: Product: UHCI Host Controller

 

[    1.997980] usb usb3: Manufacturer: Linux 2.6.30-std-def-alt15 uhci_hcd

 

[    2.002319] usb usb3: SerialNumber: 0000:00:1d.1

 

[    2.006758] usb usb3: configuration #1 chosen from 1 choice

 

[    2.011207] hub 3-0:1.0: USB hub found

 

[    2.015523] hub 3-0:1.0: 2 ports detected

 

[    2.019853] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

 

[    2.024225] uhci_hcd 0000:00:1d.2: setting latency timer to 64

 

[    2.024228] uhci_hcd 0000:00:1d.2: UHCI Host Controller

 

[    2.028474] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4

 

[    2.032838] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480

 

[    2.037105] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

 

[    2.041484] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    2.045875] usb usb4: Product: UHCI Host Controller

 

[    2.050319] usb usb4: Manufacturer: Linux 2.6.30-std-def-alt15 uhci_hcd

 

[    2.054824] usb usb4: SerialNumber: 0000:00:1d.2

 

[    2.059339] usb usb4: configuration #1 chosen from 1 choice

 

[    2.063881] hub 4-0:1.0: USB hub found

 

[    2.068302] hub 4-0:1.0: 2 ports detected

 

[    1.014782] ide-gd driver 1.18

 

[    1.034098] SCSI subsystem initialized

 

[    1.052558] Driver 'sd' needs updating - please use bus_type methods

 

[    1.073556] libata version 3.00 loaded.

 

[    1.080644]   alloc irq_desc for 18 on cpu 0 node 0

 

[    1.080646]   alloc kstat_irqs on cpu 0 node 0

 

[    1.080652] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

 

[    1.085140] pata_acpi 0000:00:1f.1: setting latency timer to 64

 

[    1.085148] pata_acpi 0000:00:1f.1: PCI INT A disabled

 

[    1.089512]   alloc irq_desc for 19 on cpu 0 node 0

 

[    1.089514]   alloc kstat_irqs on cpu 0 node 0

 

[    1.089517] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

 

[    1.093970] pata_acpi 0000:00:1f.2: setting latency timer to 64

 

[    1.093977] pata_acpi 0000:00:1f.2: PCI INT B disabled

 

[    1.106135] ata_piix 0000:00:1f.1: version 2.13

 

[    1.106143] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

 

[    1.110516] ata_piix 0000:00:1f.1: setting latency timer to 64

 

[    1.110574] scsi0 : ata_piix

 

[    1.115461] scsi1 : ata_piix

 

[    1.120416] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14

 

[    1.124601] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15

 

[    1.128634] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

 

[    1.132643] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

 

[    1.136727] ata_piix 0000:00:1f.2: setting latency timer to 64

 

[    1.136783] scsi2 : ata_piix

 

[    1.141334] scsi3 : ata_piix

 

[    1.146198] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19

 

[    1.150272] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19

 

[    1.316483] ata3.00: ATA-8: ST500DM002-1BD142, KC43, max UDMA/133

 

[    1.320646] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)

 

[    1.340513] ata3.00: configured for UDMA/133

 

[    1.462733] scsi 2:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC43 PQ: 0 ANSI: 5

 

[    1.466958] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)

 

[    1.471157] sd 2:0:0:0: [sda] Write Protect is off

 

[    1.475277] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

 

[    1.475292] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

 

[    1.483886]  sda: sda1 sda2 sda4 < sda5 >

 

[    1.511948] sd 2:0:0:0: [sda] Attached SCSI disk

 

[    1.636152] ata4.01: NODEV after polling detection

 

[    1.644212] ata4.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100

 

[    1.668232] ata4.00: configured for UDMA/100

 

[    1.673785] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222AB  SB00 PQ: 0 ANSI: 5

 

[    1.730889] usbcore: registered new interface driver usbfs

 

[    1.735562] usbcore: registered new interface driver hub

 

[    1.740124] usbcore: registered new device driver usb

 

[    1.751264] usbcore: registered new interface driver libusual

 

[    1.765200] Initializing USB Mass Storage driver...

 

[    1.769563] usbcore: registered new interface driver usb-storage

 

[    1.773873] USB Mass Storage support registered.

 

[    1.786074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

 

[    1.790618]   alloc irq_desc for 23 on cpu 0 node 0

 

[    1.790620]   alloc kstat_irqs on cpu 0 node 0

 

[    1.790626] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23

 

[    1.795186] ehci_hcd 0000:00:1d.7: setting latency timer to 64

 

[    1.795189] ehci_hcd 0000:00:1d.7: EHCI Host Controller

 

[    1.799662] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1

 

[    1.808066] ehci_hcd 0000:00:1d.7: debug port 1

 

[    1.812546] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported

 

[    1.812559] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaf7c00

 

[    1.832533] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

 

[    1.837046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

 

[    1.841540] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

[    0.308078] Trying to unpack rootfs image as initramfs...

 

[    0.326202] Freeing initrd memory: 897k freed

 

[    0.326919] Scanning for low memory corruption every 60 seconds

 

[    0.327103] audit: initializing netlink socket (disabled)

 

[    0.327117] type=2000 audit(1319040166.323:1): initialized

 

[    0.331085] highmem bounce pool size: 64 pages

 

[    0.331089] HugeTLB registered 4 MB page size, pre-allocated 0 pages

 

[    0.331150] VFS: Disk quotas dquot_6.5.2

 

[    0.331174] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

 

[    0.331215] msgmni has been set to 1713

 

[    0.331349] alg: No test for stdrng (krng)

 

[    0.331389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)

 

[    0.331393] io scheduler noop registered

 

[    0.331396] io scheduler anticipatory registered

 

[    0.331406] io scheduler cfq registered (default)

 

[    0.331419] pci 0000:00:02.0: Boot video device

 

[    0.331582]   alloc irq_desc for 24 on cpu 0 node 0

 

[    0.331584]   alloc kstat_irqs on cpu 0 node 0

 

[    0.331590] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X

 

[    0.331598] pcieport-driver 0000:00:01.0: setting latency timer to 64

 

[    0.331709]   alloc irq_desc for 25 on cpu 0 node 0

 

[    0.331711]   alloc kstat_irqs on cpu 0 node 0

 

[    0.331716] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X

 

[    0.331726] pcieport-driver 0000:00:1c.0: setting latency timer to 64

 

[    0.331869]   alloc irq_desc for 26 on cpu 0 node 0

 

[    0.331870]   alloc kstat_irqs on cpu 0 node 0

 

[    0.331876] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X

 

[    0.331886] pcieport-driver 0000:00:1c.1: setting latency timer to 64

 

[    0.332139] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3750k, total 131008k

 

[    0.332144] vesafb: mode is 800x600x16, linelength=1600, pages=135

 

[    0.332146] vesafb: scrolling: redraw

 

[    0.332149] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

 

[    0.332274] bootsplash 3.1.6-2004/03/31: looking for picture...

 

[    0.336502] bootsplash: silentjpeg size 61215 bytes

 

[    0.344086] bootsplash: ...found (800x600, 3750 bytes, v3).

 

[    0.365337] Console: switching to colour frame buffer device 97x34

 

[    0.396221] fb0: VESA VGA frame buffer device

 

[    0.396424] isapnp: Scanning for PnP cards...

 

[    0.501211] Switched to high resolution mode on CPU 1

 

[    0.503867] Switched to high resolution mode on CPU 0

 

[    0.706062] isapnp: No Plug & Play device found

 

[    0.727773] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

 

[    0.728243] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

 

[    0.728927] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

 

[    0.730268] brd: module loaded

 

[    0.730406] input: Macintosh mouse button emulation as /devices/virtual/input/input0

 

[    0.730703] Fixed MDIO Bus: probed

 

[    0.735409] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

 

[    0.740535] serio: i8042 KBD port at 0x60,0x64 irq 1

 

[    0.745329] serio: i8042 AUX port at 0x60,0x64 irq 12

 

[    0.750099] mice: PS/2 mouse device common for all mice

 

[    0.754808] EISA: Probing bus 0 at eisa.0

 

[    0.759403] cpuidle: using governor ladder

 

[    0.763922] cpuidle: using governor menu

 

[    0.768654] TCP bic registered

 

[    0.773002] Using IPI No-Shortcut mode

 

[    0.778996] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

 

[    0.787042] registered taskstats version 1

 

[    0.791670] Freeing unused kernel memory: 460k freed

 

[    0.796304] Write protecting the kernel text: 2864k

 

[    0.800776] Write protecting the kernel read-only data: 1220k

 

[    0.805276] Executing init=/init

 

[    0.987886] Uniform Multi-Platform E-IDE driver

 

[    0.998491] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports

 

[k1@comp Рабочий стол]$ dmesg

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 2.6.30-std-def-alt15 (builder@apiary.orion.altlinux.org) (gcc version 4.3.2 0081105 (ALT Linux 4.3.2-alt13) (GCC) ) #1 SMP Mon Dec 14 08:45:48 UTC 2009

[    0.000000] KERNEL supported cpus:

[    0.000000]   Intel GenuineIntel

[    0.000000]   AMD AuthenticAMD

[    0.000000]   NSC Geode by NSC

[    0.000000]   Cyrix CyrixInstead

[    0.000000]   Centaur CentaurHauls

[    0.000000]   Transmeta GenuineTMx86

[    0.000000]   Transmeta TransmetaCPU

[    0.000000]   UMC UMC UMC UMC

[    0.000000] BIOS-provided physical RAM map:

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[    0.000000]  BIOS-e820: 0000000000100000 - 0000000077da0000 (usable)

[    0.000000]  BIOS-e820: 0000000077da0000 - 0000000077dae000 (ACPI data)

[    0.000000]  BIOS-e820: 0000000077dae000 - 0000000077df0000 (ACPI NVS)

[    0.000000]  BIOS-e820: 0000000077df0000 - 0000000077e00000 (reserved)

[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

[    0.000000] DMI present.

[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.

 

[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

 

[    0.000000] last_pfn = 0x77da0 max_arch_pfn = 0x100000

 

[    0.000000] MTRR default type: uncachable

 

[    0.000000] MTRR fixed ranges enabled:

 

[    0.000000]   00000-9FFFF write-back

 

[    0.000000]   A0000-BFFFF uncachable

 

[    0.000000]   C0000-CFFFF write-protect

 

[    0.000000]   D0000-DFFFF uncachable

 

[    0.000000]   E0000-EFFFF write-through

 

[    0.000000]   F0000-FFFFF write-protect

 

[    0.000000] MTRR variable ranges enabled:

 

[    0.000000]   0 base 000000000 mask F80000000 write-back

 

[    0.000000]   1 base 077E00000 mask FFFE00000 uncachable

 

[    0.000000]   2 base 078000000 mask FF8000000 uncachable

 

[    0.000000]   3 disabled

 

[    0.000000]   4 disabled

 

[    0.000000]   5 disabled

 

[    0.000000]   6 disabled

 

[    0.000000]   7 disabled

 

[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

 

[    0.000000] Scanning 0 areas for low memory corruption

 

[    0.000000] modified physical RAM map:

 

[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)

 

[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)

 

[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)

 

[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)

 

[    0.000000]  modified: 0000000000100000 - 0000000077da0000 (usable)

 

[    0.000000]  modified: 0000000077da0000 - 0000000077dae000 (ACPI data)

 

[    0.000000]  modified: 0000000077dae000 - 0000000077df0000 (ACPI NVS)

 

[    0.000000]  modified: 0000000077df0000 - 0000000077e00000 (reserved)

 

[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)

 

[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)

 

[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000

 

[    0.000000]  0000000000 - 0000400000 page 4k

 

[    0.000000]  0000400000 - 0037400000 page 2M

 

[    0.000000]  0037400000 - 00377fe000 page 4k

 

[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000

 

[    0.000000] RAMDISK: 00e1f000 - 00eff695

 

[    0.000000] ACPI: RSDP 000f94f0 00014 (v00 ACPIAM)

 

[    0.000000] ACPI: RSDT 77da0000 00044 (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: FACP 77da0200 00084 (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: DSDT 77da05c0 0618F (v01              A1 00000000 INTL 20051117)

 

[    0.000000] ACPI: FACS 77dae000 00040

 

[    0.000000] ACPI: APIC 77da0390 0006C (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: MCFG 77da0400 0003C (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: SLIC 77da0440 00176 (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: OEMB 77dae040 00072 (v01 032411 OEMB1335 20110324 MSFT 00000097)

 

[    0.000000] ACPI: HPET 77da85c0 00038 (v01              A1 20110324 MSFT 00000097)

 

[    0.000000] ACPI: GSCI 77dae0c0 02024 (v01 032411 GMCHSCI  20110324 MSFT 00000097)

 

[    0.000000] ACPI: SSDT 77db0670 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)

 

[    0.000000] ACPI: Local APIC address 0xfee00000

 

[    0.000000] 1029MB HIGHMEM available.

 

[    0.000000] 887MB LOWMEM available.

 

[    0.000000]   mapped low ram: 0 - 377fe000

 

[    0.000000]   low ram: 0 - 377fe000

 

[    0.000000]   node 0 low ram: 00000000 - 377fe000

 

[    0.000000]   node 0 bootmap 00011000 - 00017f00

 

[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]

 

[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]

 

[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]

 

[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]

 

[    0.000000]   #3 [0000200000 - 0000744168]    TEXT DATA BSS ==> [0000200000 - 0000744168]

 

[    0.000000]   #4 [0000e1f000 - 0000eff695]          RAMDISK ==> [0000e1f000 - 0000eff695]

 

[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]

 

[    0.000000]   #6 [0000745000 - 000074810f]              BRK ==> [0000745000 - 000074810f]

 

[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]

 

[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]

 

[    0.000000] found SMP MP-table at [c00ff780] ff780

 

[    0.000000] Zone PFN ranges:

 

[    0.000000]   DMA      0x00000010 -> 0x00001000

 

[    0.000000]   Normal   0x00001000 -> 0x000377fe

 

[    0.000000]   HighMem  0x000377fe -> 0x00077da0

 

[    0.000000] Movable zone start PFN for each node

 

[    0.000000] early_node_map[2] active PFN ranges

 

[    0.000000]     0: 0x00000010 -> 0x0000009f

 

[    0.000000]     0: 0x00000100 -> 0x00077da0

 

[    0.000000] On node 0 totalpages: 490799

 

[    0.000000] free_area_init_node: node 0, pgdat c0621fe0, node_mem_map c1000200

 

[    0.000000]   DMA zone: 32 pages used for memmap

 

[    0.000000]   DMA zone: 0 pages reserved

 

[    0.000000]   DMA zone: 3951 pages, LIFO batch:0

 

[    0.000000]   Normal zone: 1744 pages used for memmap

 

[    0.000000]   Normal zone: 221486 pages, LIFO batch:31

 

[    0.000000]   HighMem zone: 2060 pages used for memmap

 

[    0.000000]   HighMem zone: 261526 pages, LIFO batch:31

 

[    0.000000] Using APIC driver default

 

[    0.000000] ACPI: PM-Timer IO Port: 0x808

 

[    0.000000] ACPI: Local APIC address 0xfee00000

 

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

 

[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

 

[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)

 

[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)

 

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

 

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

 

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

 

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

 

[    0.000000] ACPI: IRQ0 used by override.

 

[    0.000000] ACPI: IRQ2 used by override.

 

[    0.000000] ACPI: IRQ9 used by override.

 

[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs

 

[    0.000000] Using ACPI (MADT) for SMP configuration information

 

[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

 

[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs

 

[    0.000000] nr_irqs_gsi: 24

 

[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

 

[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000

 

[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000

 

[    0.000000] Allocating PCI resources starting at 80000000 (gap: 77e00000:87000000)

 

[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1

 

[    0.000000] PERCPU: Embedded 11 pages at c1f0a000, static data 21820 bytes

 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 486963

 

[    0.000000] Kernel command line: auto BOOT_IMAGE=PSPO5 ro root=UUID=8e181fa2-d202-4d66-b65e-c9479a18fbc8 resume=/dev/disk/by-uuid/391867d7-d116-482d-8b28-7e6d6a951fa2 panic=30 splash=silent

 

[    0.000000] bootsplash: silent mode.

 

[    0.000000] Enabling fast FPU save and restore... done.

 

[    0.000000] Enabling unmasked SIMD FPU exception support... done.

 

[    0.000000] Initializing CPU#0

 

[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240

 

[    0.000000] Experimental hierarchical RCU implementation.

 

[    0.000000] Experimental hierarchical RCU init done.

 

[    0.000000] NR_IRQS:2304 nr_irqs:440

 

[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)

 

[    0.000000] Fast TSC calibration failed

 

[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops

 

[    0.000000] Detected 3000.054 MHz processor.

 

[    0.004000] Console: colour dummy device 80x25

 

[    0.004000] console [tty0] enabled

 

[    0.004000] ram_console: buffer (null), invalid size 0, datasize 4294967284

 

[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

 

[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

 

[    0.004000] allocated 9817920 bytes of page_cgroup

 

[    0.004000] please try cgroup_disable=memory option if you don't want

 

[    0.004000] Initializing HighMem for node 0 (000377fe:00077da0)

 

[    0.004000] Memory: 1929912k/1963648k available (2862k kernel code, 32296k reserved, 1415k data, 460k init, 1054344k highmem)

 

[    0.004000] virtual kernel memory layout:

 

[    0.004000]     fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)

 

[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)

 

[    0.004000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)

 

[    0.004000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)

 

[    0.004000]       .init : 0xc0635000 - 0xc06a8000   ( 460 kB)

 

[    0.004000]       .data : 0xc04cb87d - 0xc062d828   (1415 kB)

 

[    0.004000]       .text : 0xc0200000 - 0xc04cb87d   (2862 kB)

 

[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

 

[    0.004000] hpet clockevent registered

 

[    0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

 

[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.10 BogoMIPS (lpj=12000216)

 

[    0.004000] Security Framework initialized

 

[    0.004000] SELinux:  Disabled at boot.

 

[    0.004000] Mount-cache hash table entries: 512

 

[    0.004000] Initializing cgroup subsys ns

 

[    0.004000] Initializing cgroup subsys cpuacct

 

[    0.004000] Initializing cgroup subsys memory

 

[    0.004000] Initializing cgroup subsys devices

 

[    0.004000] Initializing cgroup subsys freezer

 

[    0.004000] Initializing cgroup subsys net_cls

 

[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K

 

[    0.004000] CPU: L2 cache: 2048K

 

[    0.004000] CPU: Physical Processor ID: 0

 

[    0.004000] CPU: Processor Core ID: 0

 

[    0.004000] Intel machine check architecture supported.

 

[    0.004000] Intel machine check reporting enabled on CPU#0.

 

[    0.004000] using mwait in idle threads.

 

[    0.004000] Checking 'hlt' instruction... OK.

 

[    0.016538] ACPI: Core revision 20090320

 

[    0.024353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

 

[    0.067457] CPU0: Intel Pentium(R) Dual-Core  CPU      E5700  @ 3.00GHz stepping 0a

 

[    0.068001] Booting processor 1 APIC 0x1 ip 0x6000

 

[    0.004000] Initializing CPU#1

 

[    0.004000] Calibrating delay using timer specific routine.. 6000.16 BogoMIPS (lpj=12000326)

 

[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K

 

[    0.004000] CPU: L2 cache: 2048K

 

[    0.004000] CPU: Physical Processor ID: 0

 

[    0.004000] CPU: Processor Core ID: 1

 

[    0.004000] Intel machine check architecture supported.

 

[    0.004000] Intel machine check reporting enabled on CPU#1.

 

[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106

 

[    0.157300] CPU1: Intel Pentium(R) Dual-Core  CPU      E5700  @ 3.00GHz stepping 0a

 

[    0.157324] checking TSC synchronization [CPU#0 -> CPU#1]: passed.

 

[    0.160024] Brought up 2 CPUs

 

[    0.160028] Total of 2 processors activated (12000.27 BogoMIPS).

 

[    0.160072] CPU0 attaching sched-domain:

 

[    0.160074]  domain 0: span 0-1 level MC

 

[    0.160076]   groups: 0 1

 

[    0.160079] CPU1 attaching sched-domain:

 

[    0.160080]  domain 0: span 0-1 level MC

 

[    0.160082]   groups: 1 0

 

[    0.160137] net_namespace: 1088 bytes

 

[    0.160137] regulator: core version 0.5

 

[    0.160137] NET: Registered protocol family 16

 

[    0.160137] EISA bus registered

 

[    0.160137] ACPI: bus type pci registered

 

[    0.160137] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

 

[    0.160137] PCI: Not using MMCONFIG.

 

[    0.160150] PCI: Using configuration type 1 for base access

 

[    0.160163] bio: create slab <bio-0> at 0

 

[    0.164040] ACPI: EC: Look up EC in DSDT

 

[    0.170114] ACPI: Interpreter enabled

 

[    0.170119] ACPI: (supports S0 S1 S3 S4 S5)

 

[    0.170137] ACPI: Using IOAPIC for interrupt routing

 

[    0.170181] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

 

[    0.174039] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources

 

[    0.174043] PCI: Using MMCONFIG for extended config space

 

[    0.180085] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 9B, should be 9A [20090320]

 

[    0.180847] ACPI: No dock devices found.

 

[    0.181006] ACPI: PCI Root Bridge [PCI0] (0000:00)

 

[    0.181025] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:01.0: PME# disabled

 

[    0.181025] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]

 

[    0.181025] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]

 

[    0.181025] pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07]

 

[    0.181025] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf8000-0xfeafbfff]

 

[    0.181025] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:1b.0: PME# disabled

 

[    0.181025] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:1c.0: PME# disabled

 

[    0.181025] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:1c.1: PME# disabled

 

[    0.181025] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f]

 

[    0.181025] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]

 

[    0.181025] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f]

 

[    0.181025] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]

 

[    0.181025] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeaf7c00-0xfeaf7fff]

 

[    0.181025] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

 

[    0.181025] pci 0000:00:1d.7: PME# disabled

 

[    0.181025] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO

 

[    0.181025] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO

 

[    0.181025] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)

 

[    0.181025] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]

 

[    0.181025] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]

 

[    0.181025] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]

 

[    0.181025] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]

 

[    0.181025] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]

 

[    0.181025] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]

 

[    0.181025] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]

 

[    0.181025] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]

 

[    0.181025] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]

 

[    0.181025] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f]

 

[    0.181025] pci 0000:00:1f.2: PME# supported from D3hot

 

[    0.181025] pci 0000:00:1f.2: PME# disabled

 

[    0.181025] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]

 

[    0.181025] pci 0000:03:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]

 

[    0.181025] pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]

 

[    0.181054] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

 

[    0.181060] pci 0000:03:00.0: PME# disabled

 

[    0.188116] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]

 

[    0.188123] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]

 

[    0.188187] pci 0000:00:1e.0: transparent bridge

 

[    0.188219] pci_bus 0000:00: on NUMA node 0

 

[    0.188223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

 

[    0.188309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

 

[    0.188366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

 

[    0.188410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]

 

[    0.192427] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)

 

[    0.192427] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)

 

[    0.192427] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)

 

[    0.196096] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)

 

[    0.196190] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

 

[    0.196287] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

 

[    0.196384] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

 

[    0.196480] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)

 

[    0.196524] PCI: Using ACPI for IRQ routing

 

[    0.204016] NetLabel: Initializing

 

[    0.204023] NetLabel:  domain hash size = 128

 

[    0.204028] NetLabel:  protocols = UNLABELED CIPSOv4

 

[    0.204050] NetLabel:  unlabeled traffic allowed by default

 

[    0.204065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

 

[    0.204076] hpet0: 3 comparators, 64-bit 14.318180 MHz counter

 

[    0.219992] pnp: PnP ACPI init

 

[    0.220007] ACPI: bus type pnp registered

 

[    0.223573] pnp: PnP ACPI: found 17 devices

 

[    0.223576] ACPI: ACPI bus type pnp unregistered

 

[    0.223579] PnPBIOS: Disabled by ACPI PNP

 

[    0.223587] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved

 

[    0.223590] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved

 

[    0.223597] system 00:07: ioport range 0x4d0-0x4d1 has been reserved

 

[    0.223600] system 00:07: ioport range 0x800-0x87f has been reserved

 

[    0.223604] system 00:07: ioport range 0x480-0x4bf has been reserved

 

[    0.223607] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved

 

[    0.223611] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved

 

[    0.223614] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved

 

[    0.223620] system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved

 

[    0.223624] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved

 

[    0.223628] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved

 

[    0.223634] system 00:0e: ioport range 0xa00-0xa0f has been reserved

 

[    0.223637] system 00:0e: ioport range 0xa10-0xa1f has been reserved

 

[    0.223640] system 00:0e: ioport range 0xa20-0xa2f has been reserved

 

[    0.223643] system 00:0e: ioport range 0xa30-0xa3f has been reserved

 

[    0.223648] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved

 

[    0.223654] system 00:10: iomem range 0x0-0x9ffff could not be reserved

 

[    0.223657] system 00:10: iomem range 0xc0000-0xcffff could not be reserved

 

[    0.223660] system 00:10: iomem range 0xe0000-0xfffff could not be reserved

 

[    0.223664] system 00:10: iomem range 0x100000-0x77dfffff could not be reserved

 

[    0.223667] system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved

 

[    0.258414] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

 

[    0.258418] pci 0000:00:01.0:   IO window: disabled

 

[    0.258421] pci 0000:00:01.0:   MEM window: disabled

 

[    0.258425] pci 0000:00:01.0:   PREFETCH window: disabled

 

[    0.258429] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02

 

[    0.258431] pci 0000:00:1c.0:   IO window: disabled

 

[    0.258436] pci 0000:00:1c.0:   MEM window: disabled

 

[    0.258440] pci 0000:00:1c.0:   PREFETCH window: disabled

 

[    0.258445] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03

 

[    0.258449] pci 0000:00:1c.1:   IO window: 0xe000-0xefff

 

[    0.258454] pci 0000:00:1c.1:   MEM window: 0xfeb00000-0xfebfffff

 

[    0.258458] pci 0000:00:1c.1:   PREFETCH window: disabled

 

[    0.258464] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04

 

[    0.258466] pci 0000:00:1e.0:   IO window: disabled

 

[    0.258471] pci 0000:00:1e.0:   MEM window: disabled

 

[    0.258475] pci 0000:00:1e.0:   PREFETCH window: disabled

 

[    0.258484]   alloc irq_desc for 16 on cpu 0 node 0

 

[    0.258486]   alloc kstat_irqs on cpu 0 node 0

 

[    0.258489] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 

[    0.258493] pci 0000:00:01.0: setting latency timer to 64

 

[    0.258498] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 

[    0.258503] pci 0000:00:1c.0: setting latency timer to 64

 

[    0.258508]   alloc irq_desc for 17 on cpu 0 node 0

 

[    0.258509]   alloc kstat_irqs on cpu 0 node 0

 

[    0.258512] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

 

[    0.258516] pci 0000:00:1c.1: setting latency timer to 64

 

[    0.258521] pci 0000:00:1e.0: setting latency timer to 64

 

[    0.258524] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]

 

[    0.258526] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]

 

[    0.258528] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]

 

[    0.258530] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]

 

[    0.258532] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]

 

[    0.258533] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]

 

[    0.258567] NET: Registered protocol family 2

 

[    0.299998] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

 

[    0.300262] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

 

[    0.300642] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

 

[    0.300848] TCP: Hash tables configured (established 131072 bind 65536)

 

[    0.300851] TCP reno registered

 

[    0.307993] NET: Registered protocol family 1